Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRV42VV-6533D-R10

20-port sector/multibeam antenna 4x 694–960 MHz , 8x 1695-2690 MHz 65° HPBW and 8x 1710–2690 MHz 2x 2-Beam 33°HPBW, 10x RET. Band cascaded SRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in EN1991-1-4 standard
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (8) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 58.6 kg | 129.191 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,300 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1920 1920–2180 2300–2690 1710–1920 1920–2180 2300–2690
Gain, dBi 15.6 15.9 15.9 15.7 16.9 17.7 17.5 19.0 19.4
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 71 65 63 76 67 59 37 34 28
Beamwidth, Vertical, degrees 9.3 8.3 7.6 7.1 6.4 5.4 7.2 6.5 5.5
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 16 16 16 19 16 18 20
Front-to-Back Ratio at 180°, dB 30 28 30 32 30 33 39 38 35
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1920 1920–2180 2300–2690 1710–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 15.1 15.6 15.7 15.2 16.3 17.3 17.0 18.4 18.8
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4 ±0.4 ±0.8 ±0.7 ±0.4 ±1.1 ±0.9 ±1
Beamwidth, Horizontal Tolerance, degrees ±7.9 ±9.2 ±5.4 ±6.7 ±7 ±4.5 ±3.4 ±2.3 ±3.6
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.5 ±0.3 ±0.5 ±0.4 ±0.4 ±0.5 ±0.4 ±0.5
USLS, beampeak to 20° above beampeak, dB 17 16 15 14 16 14 15 15 13
Front-to-Back Total Power at 180° ± 30°, dB 22 22 23 23 23 25 31 31 28
CPR at Boresight, dB 23 22 18 19 22 23 16 20 20
CPR at Sector, dB 12 9 13 8 6 8
CPR at 10 dB Horizontal Beamwidth, dB 6 11 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 944.0 N @ 150 km/h (212.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 292.0 N @ 150 km/h (65.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,130.0 N @ 150 km/h (254.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 650.0 N @ 150 km/h (146.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 80.4 kg | 177.251 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in EN1991-1-4 standard
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 16
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (8) | Low band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, antenna only 58.6 kg | 129.191 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,300 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1920 1920–2180 2300–2690 1710–1920 1920–2180 2300–2690
Gain, dBi 15.6 15.9 15.9 15.7 16.9 17.7 17.5 19.0 19.4
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 71 65 63 76 67 59 37 34 28
Beamwidth, Vertical, degrees 9.3 8.3 7.6 7.1 6.4 5.4 7.2 6.5 5.5
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 16 16 16 19 16 18 20
Front-to-Back Ratio at 180°, dB 30 28 30 32 30 33 39 38 35
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25 25
Isolation, Beam to Beam, dB 17 17 17
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1920 1920–2180 2300–2690 1710–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 15.1 15.6 15.7 15.2 16.3 17.3 17.0 18.4 18.8
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4 ±0.4 ±0.8 ±0.7 ±0.4 ±1.1 ±0.9 ±1
Beamwidth, Horizontal Tolerance, degrees ±7.9 ±9.2 ±5.4 ±6.7 ±7 ±4.5 ±3.4 ±2.3 ±3.6
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.5 ±0.3 ±0.5 ±0.4 ±0.4 ±0.5 ±0.4 ±0.5
USLS, beampeak to 20° above beampeak, dB 17 16 15 14 16 14 15 15 13
Front-to-Back Total Power at 180° ± 30°, dB 22 22 23 23 23 25 31 31 28
CPR at Boresight, dB 23 22 18 19 22 23 16 20 20
CPR at Sector, dB 12 9 13 8 6 8
CPR at 10 dB Horizontal Beamwidth, dB 6 11 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 944.0 N @ 150 km/h (212.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 292.0 N @ 150 km/h (65.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,130.0 N @ 150 km/h (254.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 650.0 N @ 150 km/h (146.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 80.4 kg | 177.251 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification