UNNPX206R3
6-port sector antenna, 2x 698–894 and 4x 1710–2180 MHz, 33° HPBW, 3x RET.
Specifications
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ASA, UV stabilized |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 3 female | 3 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 622 mm | 24.488 in |
| Depth | 229 mm | 9.016 in |
| Length | 1584 mm | 62.362 in |
| Net Weight, without mounting kit | 30 kg | 66.139 lb |
Array Layout
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 894 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–790 | 790–894 | 1710–1920 | 1920–2180 |
| Gain, dBi | 17.2 | 17.7 | 17.4 | 18.2 |
| Beamwidth, Horizontal, degrees | 35 | 31 | 34 | 32 |
| Beamwidth, Vertical, degrees | 15.8 | 14.1 | 13.2 | 11.8 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 18 | 18 | 18 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 35 | 28 | 32 |
| CPR at Boresight, dB | 22 | 21 | 20 | 20 |
| Isolation, Cross Polarization, dB | 30 | 30 | ||
| Isolation by Beam Tilt, dB | 28, 0° | 1° 30, 2° – 10° | 28, 0° | 1° 30, 2° – 10° | ||
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 500 | 500 | 300 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–790 | 790–894 | 1710–1920 | 1920–2180 |
| Gain by all Beam Tilts, average, dBi | 16.8 | 17.5 | 17.0 | 17.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.3 | ±0.5 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 0 ° | 16.8 5 ° | 16.8 10 ° | 16.7 | 0 ° | 17.5 5 ° | 17.5 10 ° | 17.4 | 0 ° | 16.9 5 ° | 17.0 10 ° | 17.0 | 0 ° | 17.9 5 ° | 17.9 10 ° | 17.8 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.7 | ±1.8 | ±1.4 | ±2.7 |
| Beamwidth, Vertical Tolerance, degrees | ±0.9 | ±0.7 | ±0.9 | ±0.7 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 18 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 24 | 27 | 31 | 33 |
| CPR at Boresight, dB | 23 | 22 | 21 | 20 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 1,206.0 N @ 150 km/h (271.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 219.0 N @ 150 km/h (49.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,237.0 N @ 150 km/h (278.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 200 km/h (124 mph) |
Packaging and Weights
| Width, packed | 712 mm | 28.032 in |
| Depth, packed | 330 mm | 12.992 in |
| Length, packed | 1787 mm | 70.354 in |
| Weight, gross | 50 kg | 110.231 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ASA, UV stabilized |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 3 female | 3 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 13 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 622 mm | 24.488 in |
| Depth | 229 mm | 9.016 in |
| Length | 1584 mm | 62.362 in |
| Net Weight, without mounting kit | 30 kg | 66.139 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 894 MHz | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 698–790 | 790–894 | 1710–1920 | 1920–2180 |
| Gain, dBi | 17.2 | 17.7 | 17.4 | 18.2 |
| Beamwidth, Horizontal, degrees | 35 | 31 | 34 | 32 |
| Beamwidth, Vertical, degrees | 15.8 | 14.1 | 13.2 | 11.8 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 18 | 18 | 18 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 35 | 28 | 32 |
| CPR at Boresight, dB | 22 | 21 | 20 | 20 |
| Isolation, Cross Polarization, dB | 30 | 30 | ||
| Isolation by Beam Tilt, dB | 28, 0° | 1°; 30, 2° – 10° | 28, 0° | 1°; 30, 2° – 10° | ||
| Isolation, Inter-band, dB | 30 | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 | 1.43 | 15.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 500 | 500 | 300 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–790 | 790–894 | 1710–1920 | 1920–2180 |
| Gain by all Beam Tilts, average, dBi | 16.8 | 17.5 | 17.0 | 17.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.3 | ±0.5 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 0 ° | 16.8; 5 ° | 16.8; 10 ° | 16.7 | 0 ° | 17.5; 5 ° | 17.5; 10 ° | 17.4 | 0 ° | 16.9; 5 ° | 17.0; 10 ° | 17.0 | 0 ° | 17.9; 5 ° | 17.9; 10 ° | 17.8 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.7 | ±1.8 | ±1.4 | ±2.7 |
| Beamwidth, Vertical Tolerance, degrees | ±0.9 | ±0.7 | ±0.9 | ±0.7 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 18 | 18 | 18 |
| Front-to-Back Total Power at 180° ± 30°, dB | 24 | 27 | 31 | 33 |
| CPR at Boresight, dB | 23 | 22 | 21 | 20 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 1,206.0 N @ 150 km/h (271.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 219.0 N @ 150 km/h (49.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,237.0 N @ 150 km/h (278.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 200 km/h (124 mph) |
Packaging and Weights
| Width, packed | 712 mm | 28.032 in |
| Depth, packed | 330 mm | 12.992 in |
| Length, packed | 1787 mm | 70.354 in |
| Weight, gross | 50 kg | 110.231 lb |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Structural Support, Tools & Accessories
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Included Products
Antennas
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Structural Support, Tools & Accessories
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
-
![]()
T-041-GL-E Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
Related Products
Antennas
-
![]()
APS-XT Antenna Orientation and Location Sensing System
Other Ways to Browse
