Warning Icon
This product was discontinued on: March 30, 2021

For other alternatives, please contact us for more information.

0 Replacement products available

F-65C-R1

2-port sector antenna, 2x 617–806 MHz, 65° HPBW, 1x RET, 600MHz-Ready Antenna Technology

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2438 mm | 95.984 in
Net Weight, without mounting kit 28 kg | 61.729 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–806
Gain, dBi 15.8 16.4
Beamwidth, Horizontal, degrees 66 60
Beamwidth, Vertical, degrees 10.4 9.3
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 19 17
Front-to-Back Ratio at 180°, dB 30 27
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153
Input Power per Port at 50°C, maximum, watts 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–806
Gain by all Beam Tilts, average, dBi 15.7 16.1
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 15.5
7 ° | 15.8
13 ° | 15.6
2 ° | 15.9
7 ° | 16.3
13 ° | 16.0
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±4.0
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7
USLS, beampeak to 20° above beampeak, dB 17 14
Front-to-Back Total Power at 180° ± 30°, dB 25 22
CPR at Boresight, dB 22 24
CPR at Sector, dB 10 8

Mechanical Specifications

Wind Loading @ Velocity, frontal 510.0 N @ 150 km/h (114.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 872.0 N @ 150 km/h (196.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 524.0 N @ 150 km/h (117.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 514 mm | 20.236 in
Depth, packed 372 mm | 14.646 in
Length, packed 2645 mm | 104.134 in
Weight, gross 44.4 kg | 97.885 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2438 mm | 95.984 in
Net Weight, without mounting kit 28 kg | 61.729 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–806
Gain, dBi 15.8 16.4
Beamwidth, Horizontal, degrees 66 60
Beamwidth, Vertical, degrees 10.4 9.3
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 19 17
Front-to-Back Ratio at 180°, dB 30 27
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153
Input Power per Port at 50°C, maximum, watts 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–806
Gain by all Beam Tilts, average, dBi 15.7 16.1
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.4
Gain by Beam Tilt, average, dBi 2 ° | 15.5; 7 ° | 15.8;13 ° | 15.6 2 ° | 15.9; 7 ° | 16.3;13 ° | 16.0
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±4.0
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7
USLS, beampeak to 20° above beampeak, dB 17 14
Front-to-Back Total Power at 180° ± 30°, dB 25 22
CPR at Boresight, dB 22 24
CPR at Sector, dB 10 8

Mechanical Specifications

Wind Loading @ Velocity, frontal 510.0 N @ 150 km/h (114.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 374.0 N @ 150 km/h (84.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 872.0 N @ 150 km/h (196.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 524.0 N @ 150 km/h (117.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 514 mm | 20.236 in
Depth, packed 372 mm | 14.646 in
Length, packed 2645 mm | 104.134 in
Weight, gross 44.4 kg | 97.885 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted