Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRZZVVS4-65DR7NV4

20-port sector antenna, 4x 694-960, 4x 1427-2690, 4x 1695-2690 MHz, 65° HPBW and 8x 3300-3800 MHz, 90° HPBW, 7x RET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in "Cascaded SRET" configuration
  • Cluster connectors for the beam-forming array, including eight RF ports plus one calibration port
  • Antenna shape optimized for wind load reduction
  • S4 array uses MQ cluster connectors
  • Retractable tilt indicator rods
  • Includes seven Internal RET’s

General Specifications

Antenna Type Sector- and beamforming
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2769 mm | 109.016 in
TDD Column Spacing 42 mm | 1.654 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 15.6 16.1 16.4 15.4 17.5 18.3 17.3 18.1 15.8
Beamwidth, Horizontal, degrees 63 55 52 66 61 61 64 62 84
Beamwidth, Vertical, degrees 7.7 6.8 6.3 7.1 5.5 4.4 6 4.9 6.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 19 17 18 15 17 16 21 16
Front-to-Back Ratio at 180°, dB 32 32 32 32 31 31 30 31 27
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27 25
Isolation, Inter-band, dB 27 27 27 26 26 26 26 26 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -130
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150 75

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain by all Beam Tilts, average, dBi 15.2 15.9 16.1 15.1 16.9 17.9 16.7 17.7 15.1
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3 ±0.4 ±0.4 ±1 ±0.5 ±1 ±0.4 ±0.7
Beamwidth, Horizontal Tolerance, degrees ±8.1 ±4.8 ±4.8 ±4.7 ±8.8 ±3.8 ±4.7 ±3.6 ±19.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.3 ±0.3 ±0.7 ±0.3 ±0.7 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 14 13 14 14 15 17 16 17 13
Front-to-Back Total Power at 180° ± 30°, dB 23 23 23 24 26 27 25 25 22
CPR at Boresight, dB 23 24 23 15 19 16 19 22 16

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 18.1
Beamwidth, Horizontal, degrees 65
Beamwidth, Vertical, degrees 6.3
Front-to-Back Total Power at 180° ± 30°, dB 26
USLS (First Lobe), dB 21

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Steered 0° Gain, dBi 20.8
Steered 0° Beamwidth, Horizontal, degrees 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 29
Steered 0° Horizontal Sidelobe, dB 16
Steered 30° Gain, dBi 19.5
Steered 30° Beamwidth, Horizontal, degrees 29
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 27

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 19.6
Beamwidth, Horizontal, degrees 31
Front-to-Back Total Power at 180° ± 30°, dB 27
Horizontal Sidelobe, dB 19

Mechanical Specifications

Wind Loading @ Velocity, frontal 680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 356 mm | 14.016 in
Length, packed 2897 mm | 114.055 in
Weight, gross 70.6 kg | 155.646 lb
Weight, net 49.6 kg | 109.349 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector- and beamforming
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 20

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2769 mm | 109.016 in
TDD Column Spacing 42 mm | 1.654 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 15.6 16.1 16.4 15.4 17.5 18.3 17.3 18.1 15.8
Beamwidth, Horizontal, degrees 63 55 52 66 61 61 64 62 84
Beamwidth, Vertical, degrees 7.7 6.8 6.3 7.1 5.5 4.4 6 4.9 6.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 19 17 18 15 17 16 21 16
Front-to-Back Ratio at 180°, dB 32 32 32 32 31 31 30 31 27
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27 25
Isolation, Inter-band, dB 27 27 27 26 26 26 26 26 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -130
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150 75

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain by all Beam Tilts, average, dBi 15.2 15.9 16.1 15.1 16.9 17.9 16.7 17.7 15.1
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3 ±0.4 ±0.4 ±1 ±0.5 ±1 ±0.4 ±0.7
Beamwidth, Horizontal Tolerance, degrees ±8.1 ±4.8 ±4.8 ±4.7 ±8.8 ±3.8 ±4.7 ±3.6 ±19.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.3 ±0.3 ±0.7 ±0.3 ±0.7 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 14 13 14 14 15 17 16 17 13
Front-to-Back Total Power at 180° ± 30°, dB 23 23 23 24 26 27 25 25 22
CPR at Boresight, dB 23 24 23 15 19 16 19 22 16

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 18.1
Beamwidth, Horizontal, degrees 65
Beamwidth, Vertical, degrees 6.3
Front-to-Back Total Power at 180° ± 30°, dB 26
USLS (First Lobe), dB 21

Electrical Specifications, Service Beam

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Steered 0° Gain, dBi 20.8
Steered 0° Beamwidth, Horizontal, degrees 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 29
Steered 0° Horizontal Sidelobe, dB 16
Steered 30° Gain, dBi 19.5
Steered 30° Beamwidth, Horizontal, degrees 29
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 27

Electrical Specifications, Soft Split

Frequency Band, MHz 694–790 790–890 880–960 1427–1518 1695–2200 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 19.6
Beamwidth, Horizontal, degrees 31
Front-to-Back Total Power at 180° ± 30°, dB 27
Horizontal Sidelobe, dB 19

Mechanical Specifications

Wind Loading @ Velocity, frontal 680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 356 mm | 14.016 in
Length, packed 2897 mm | 114.055 in
Weight, gross 70.6 kg | 155.646 lb
Weight, net 49.6 kg | 109.349 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification