Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

UNA008R-V2

1-port omni antenna, 694–896 MHz, 360° HPBW, 1x RET with manual override. Ships with F-129-S4 mounting kit.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Omni
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Polyester fiberglass pultrusion
Radiator Material Copper
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 1
RF Connector Quantity, total 1

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Length 2815 mm | 110.827 in
Net Weight, without mounting kit 9.8 kg | 21.605 lb
Outer Diameter 56 mm | 2.205 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 896 MHz
Polarization Vertical

Electrical Specifications

Frequency Band, MHz 694–896
Gain, dBi 8.9
Beamwidth, Horizontal, degrees 360
Beamwidth, Vertical, degrees 9.7
Beam Tilt, degrees 0–8
USLS (First Lobe), dB 15
VSWR | Return loss, dB 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150
Input Power per Port, maximum, watts 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 299.0 N @ 150 km/h (67.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 233.0 N @ 150 km/h (52.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 299.0 N @ 150 km/h (67.2 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 300 mm | 11.811 in
Depth, packed 300 mm | 11.811 in
Length, packed 3044 mm | 119.843 in
Weight, gross 24.8 kg | 54.675 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Omni
Band Single band
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Polyester fiberglass pultrusion
Radiator Material Copper
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 1
RF Connector Quantity, total 1

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Length 2815 mm | 110.827 in
Net Weight, without mounting kit 9.8 kg | 21.605 lb
Outer Diameter 56 mm | 2.205 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 896 MHz
Polarization Vertical

Electrical Specifications

Frequency Band, MHz 694–896
Gain, dBi 8.9
Beamwidth, Horizontal, degrees 360
Beamwidth, Vertical, degrees 9.7
Beam Tilt, degrees 0–8
USLS (First Lobe), dB 15
VSWR | Return loss, dB 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150
Input Power per Port, maximum, watts 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 299.0 N @ 150 km/h (67.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 233.0 N @ 150 km/h (52.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 299.0 N @ 150 km/h (67.2 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 300 mm | 11.811 in
Depth, packed 300 mm | 11.811 in
Length, packed 3044 mm | 119.843 in
Weight, gross 24.8 kg | 54.675 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system