Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

R-33D-R1VB

2-port sector antenna, 2x 694–960, 33° HPBW, 1x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2658 mm | 104.646 in
Net Weight, antenna only 35.3 kg | 77.823 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 500 W

Electrical Specifications

R1 R1 R1
Frequency Band, MHz 698–806 790–894 890–960
RF Port 1,2 1,2 1,2
Gain, dBi 19.1 19.5 20.0
Beamwidth, Horizontal, degrees 37 33 32
Beamwidth, Vertical, degrees 8.8 7.8 7.4
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 22 21 22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 36 33 33
Isolation, Cross Polarization, dB 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 300 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 754.0 N @ 150 km/h (169.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 678 mm | 26.693 in
Depth, packed 315 mm | 12.402 in
Length, packed 2900 mm | 114.173 in
Weight, gross 54.9 kg | 121.034 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 579 mm | 22.795 in
Depth 212 mm | 8.346 in
Length 2658 mm | 104.646 in
Net Weight, antenna only 35.3 kg | 77.823 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 500 W

Electrical Specifications

R1 R1 R1
Frequency Band, MHz 698–806 790–894 890–960
RF Port 1,2 1,2 1,2
Gain, dBi 19.1 19.5 20.0
Beamwidth, Horizontal, degrees 37 33 32
Beamwidth, Vertical, degrees 8.8 7.8 7.4
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 22 21 22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 36 33 33
Isolation, Cross Polarization, dB 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 300 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 754.0 N @ 150 km/h (169.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 678 mm | 26.693 in
Depth, packed 315 mm | 12.402 in
Length, packed 2900 mm | 114.173 in
Weight, gross 54.9 kg | 121.034 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification