Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

V4-65A-R4VB

8-port sector antenna, 8x 1695–2690 MHz, 65° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
  • All RETs have a tilt indicator rod

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Mid band (4)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 497 mm | 19.567 in
Depth 127 mm | 5.000 in
Length 1397 mm | 55.000 in
Net Weight, antenna only 21.1 kg | 46.517 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1990 1920–2300 2300–2500 2490–2690
Beamwidth, Horizontal, degrees 66 61 60 59
Beamwidth, Vertical, degrees 6.9 6.2 5.4 5
Beam Tilt, degrees 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 24 24 17 15
Front-to-Back Ratio at 180°, dB 35 35 36 33
Front-to-Back Total Power at 180° ± 30°, dB 27 28 28 27
Isolation, Cross Polarization, dB 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 620.0 N @ 150 km/h (139.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 750.0 N @ 150 km/h (168.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 592 mm | 23.307 in
Depth, packed 247 mm | 9.724 in
Length, packed 1597 mm | 62.874 in
Weight, gross 30.6 kg | 67.461 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Mid band (4)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 497 mm | 19.567 in
Depth 127 mm | 5.000 in
Length 1397 mm | 55.000 in
Net Weight, antenna only 21.1 kg | 46.517 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1990 1920–2300 2300–2500 2490–2690
Beamwidth, Horizontal, degrees 66 61 60 59
Beamwidth, Vertical, degrees 6.9 6.2 5.4 5
Beam Tilt, degrees 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 24 24 17 15
Front-to-Back Ratio at 180°, dB 35 35 36 33
Front-to-Back Total Power at 180° ± 30°, dB 27 28 28 27
Isolation, Cross Polarization, dB 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 620.0 N @ 150 km/h (139.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 140.0 N @ 150 km/h (31.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 750.0 N @ 150 km/h (168.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 592 mm | 23.307 in
Depth, packed 247 mm | 9.724 in
Length, packed 1597 mm | 62.874 in
Weight, gross 30.6 kg | 67.461 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification