For other alternatives, please contact us for more information.

0 Alternative products available

RVVT4-65D-R4

14-port sector antenna, 2x 694–960, 4x 1695-2690 and 8x 2300–2690 MHz, 65° HPBW, 4x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Combination of Tri-Band antenna and 2.4/2.6 GHz 8T8R beam forming antenna
Internal SBT RET support via Calibration Port of 2.4/2.6 GHz array
Optimized for Software Defined Split Six Sector applications on 2.4/2.6 GHz
Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Calibration Connector Interface	4.3-10 Female
Calibration Connector Quantity	1
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	12
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	2
RF Connector Quantity, total	14

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Cal Port
Internal RET	High band (3) \| Low band (1)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	37.8 kg \| 83.335 lb
TDD Column Spacing	58 mm \| 2.283 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz \| 1695 – 2690 MHz \| 2300 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1	R1	R1	Y1-Y4	Y1-Y4	Y5-Y6	Y5-Y6	Y5-Y6
Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi	16.6	17.0	17.3	16.4	16.3	16.8	17.3	17.6
Beamwidth, Horizontal, degrees	68	67	65	94	95	62	61	63
Beamwidth, Vertical, degrees	8.4	7.5	6.9	5.7	5.3	7.3	6.5	5.5
Beam Tilt, degrees	0–10	0–10	0–10	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	17	19	20	16	17	16	18	21
Front-to-Back Ratio at 180°, dB	30	32	35	31	30	34	38	33
Coupling level, Amp, Antenna port to Cal port, dB				26	26
Coupling level, max Amp Δ, Antenna port to Cal port, dB				±2	±2
Coupler, max Amp Δ, Antenna port to Cal port, dB				0.9	0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees				7	7
Isolation, Cross Polarization, dB	28	28	28	28	28	28	28	28
Isolation, Inter-band, dB	30	30	30	20	20	30	30	30
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	250	250	250	150	150	200	200	150

Electrical Specifications, Broadcast 65

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi				17.2	17.1
Beamwidth, Horizontal, degrees				62	62
Beamwidth, Horizontal Tolerance, degrees				±3.4	±3.7
Beamwidth, Vertical, degrees				5.7	5.3
Beamwidth, Vertical Tolerance, degrees				±0.4	±0.2
USLS (First Lobe), dB				17	17

Electrical Specifications, Service Beam

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Steered 0° Gain, dBi				21.3	21.2
Steered 0° Gain Tolerance, dBi				±0.4	±0.5
Steered 0° Beamwidth, Horizontal, degrees				26	25
Steered 0° CPR over 10 dB Beamwidth, dB				18	19
Steered 0° Horizontal Sidelobe, dB				13	11
Steered 30° Gain, dBi				20.6	20.5
Steered 30° Gain Tolerance, dBi				±0.4	±0.6
Steered 30° Beamwidth, Horizontal, degrees				27	26
Steered 30° CPR over 10 dB Beamwidth, dB				13	13

Electrical Specifications, Soft Split

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi				20.3	20.3
Beamwidth, Horizontal, degrees				31	30
Horizontal Sidelobe, dB				21	19

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.45 m² \| 4.844 ft²
Effective Projective Area (EPA), lateral	0.38 m² \| 4.09 ft²
Mechanical Tilt Range	0°–12°
Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	460 mm \| 18.11 in
Depth, packed	350 mm \| 13.78 in
Length, packed	2830 mm \| 111.417 in
Weight, gross	51.8 kg \| 114.199 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Calibration Connector Interface	4.3-10 Female
Calibration Connector Quantity	1
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	12
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	2
RF Connector Quantity, total	14

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Cal Port
Internal RET	High band (3) \| Low band (1)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	37.8 kg \| 83.335 lb
TDD Column Spacing	58 mm \| 2.283 in

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz \| 1695 – 2690 MHz \| 2300 – 2690 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1	R1	R1	Y1-Y4	Y1-Y4	Y5-Y6	Y5-Y6	Y5-Y6
Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi	16.6	17.0	17.3	16.4	16.3	16.8	17.3	17.6
Beamwidth, Horizontal, degrees	68	67	65	94	95	62	61	63
Beamwidth, Vertical, degrees	8.4	7.5	6.9	5.7	5.3	7.3	6.5	5.5
Beam Tilt, degrees	0–10	0–10	0–10	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	17	19	20	16	17	16	18	21
Front-to-Back Ratio at 180°, dB	30	32	35	31	30	34	38	33
Coupling level, Amp, Antenna port to Cal port, dB				26	26
Coupling level, max Amp Δ, Antenna port to Cal port, dB				±2	±2
Coupler, max Amp Δ, Antenna port to Cal port, dB				0.9	0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees				7	7
Isolation, Cross Polarization, dB	28	28	28	28	28	28	28	28
Isolation, Inter-band, dB	30	30	30	20	20	30	30	30
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	250	250	250	150	150	200	200	150

Electrical Specifications, Broadcast 65

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi				17.2	17.1
Beamwidth, Horizontal, degrees				62	62
Beamwidth, Horizontal Tolerance, degrees				±3.4	±3.7
Beamwidth, Vertical, degrees				5.7	5.3
Beamwidth, Vertical Tolerance, degrees				±0.4	±0.2
USLS (First Lobe), dB				17	17

Electrical Specifications, Service Beam

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Steered 0° Gain, dBi				21.3	21.2
Steered 0° Gain Tolerance, dBi				±0.4	±0.5
Steered 0° Beamwidth, Horizontal, degrees				26	25
Steered 0° CPR over 10 dB Beamwidth, dB				18	19
Steered 0° Horizontal Sidelobe, dB				13	11
Steered 30° Gain, dBi				20.6	20.5
Steered 30° Gain Tolerance, dBi				±0.4	±0.6
Steered 30° Beamwidth, Horizontal, degrees				27	26
Steered 30° CPR over 10 dB Beamwidth, dB				13	13

Electrical Specifications, Soft Split

Frequency Band, MHz	694–790	790–890	890–960	2300–2500	2490–2690	1695–1920	1920–2200	2300–2690
Gain, dBi				20.3	20.3
Beamwidth, Horizontal, degrees				31	30
Horizontal Sidelobe, dB				21	19

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.45 m² \| 4.844 ft²
Effective Projective Area (EPA), lateral	0.38 m² \| 4.09 ft²
Mechanical Tilt Range	0°–12°
Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	460 mm \| 18.11 in
Depth, packed	350 mm \| 13.78 in
Length, packed	2830 mm \| 111.417 in
Weight, gross	51.8 kg \| 114.199 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted