Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRVV-65A-R4VB

8-port sector antenna, 4x 698–960 and 4x 1710–2690 MHz, 65°HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Antenna with integrated pluggable RET
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 469 mm | 18.465 in
Depth 198 mm | 7.795 in
Length 1500 mm | 59.055 in
Net Weight, antenna only 24.2 kg | 53.352 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 790–894 890–960 1710–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-8 5-8 5-8 5-8
Gain, dBi 13.9 14.4 14.5 17.3 17.3 17.2 17.4
Beamwidth, Horizontal, degrees 65 66 65 65 64 63 57
Beamwidth, Vertical, degrees 15.9 14.2 13 6.4 6 5.2 4.6
Beam Tilt, degrees 2–14 2–14 2–14 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 20 20 18 20 24 22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 25 26 27 29 28 26 25
Isolation, Cross Polarization, dB 25 25 25 28 28 28 28
Isolation, Inter-band, dB 27 27 27 27 27 27 27
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 394.0 N @ 150 km/h (88.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 206.0 N @ 150 km/h (46.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 419.0 N @ 150 km/h (94.2 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 540 mm | 21.260 in
Depth, packed 275 mm | 10.827 in
Length, packed 1770 mm | 69.685 in
Weight, gross 33.9 kg | 74.737 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 469 mm | 18.465 in
Depth 198 mm | 7.795 in
Length 1500 mm | 59.055 in
Net Weight, antenna only 24.2 kg | 53.352 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

R1,R2 R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 790–894 890–960 1710–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-8 5-8 5-8 5-8
Gain, dBi 13.9 14.4 14.5 17.3 17.3 17.2 17.4
Beamwidth, Horizontal, degrees 65 66 65 65 64 63 57
Beamwidth, Vertical, degrees 15.9 14.2 13 6.4 6 5.2 4.6
Beam Tilt, degrees 2–14 2–14 2–14 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 20 20 18 20 24 22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 25 26 27 29 28 26 25
Isolation, Cross Polarization, dB 25 25 25 28 28 28 28
Isolation, Inter-band, dB 27 27 27 27 27 27 27
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 200 200 200 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 394.0 N @ 150 km/h (88.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 206.0 N @ 150 km/h (46.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 419.0 N @ 150 km/h (94.2 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 540 mm | 21.260 in
Depth, packed 275 mm | 10.827 in
Length, packed 1770 mm | 69.685 in
Weight, gross 33.9 kg | 74.737 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification