0 Alternative products available

R2HH-6533D-R5

10-port sector/multibeam antenna, 2x 694–960 MHz 65° HPBW and 8x 1695–2180 MHz 4x 33°HPBW, 5x RET with tilt indicators

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
Enhances network capacity through six sectors on high band while maintaining low band coverage layer through three sectors with only three antenna faces

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Copper \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (1)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	35 kg \| 77.162 lb

Click on image to enlarge.

Click on image to enlarge.

Click on image to enlarge.

Frequency Band, MHz	694–790	790–890	880–960	1695–1880	1850–1990	1920–2180
Gain, dBi	16.4	16.9	16.9	18.4	19.3	19.8
Beam Centers, Horizontal, degrees				±27	±27	±27
Beamwidth, Horizontal, degrees	68	65	65	33	31	31
Beamwidth, Vertical, degrees	8.9	8	7.4	7.2	6.8	6.4
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	17	20	19	16	16	17
Front-to-Back Ratio at 180°, dB	32	34	34	28	34	36
Isolation, Cross Polarization, dB	28	28	28	25	25	25
Isolation, Inter-band, dB	30	30	30	30	30	30
Isolation, Beam to Beam, dB				17	17	17
VSWR \| Return loss, dB	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	250

Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Copper \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (1)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	350 mm \| 13.78 in
Depth	208 mm \| 8.189 in
Length	2688 mm \| 105.827 in
Net Weight, without mounting kit	35 kg \| 77.162 lb

Frequency Band, MHz	694–790	790–890	880–960	1695–1880	1850–1990	1920–2180
Gain, dBi	16.4	16.9	16.9	18.4	19.3	19.8
Beam Centers, Horizontal, degrees				±27	±27	±27
Beamwidth, Horizontal, degrees	68	65	65	33	31	31
Beamwidth, Vertical, degrees	8.9	8	7.4	7.2	6.8	6.4
Beam Tilt, degrees	2–12	2–12	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	17	20	19	16	16	17
Front-to-Back Ratio at 180°, dB	32	34	34	28	34	36
Isolation, Cross Polarization, dB	28	28	28	25	25	25
Isolation, Inter-band, dB	30	30	30	30	30	30
Isolation, Beam to Beam, dB				17	17	17
VSWR \| Return loss, dB	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5	1.46 \| 14.5
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	250

Wind Loading @ Velocity, frontal	477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Click on image to enlarge.

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted