For other alternatives, please contact us for more information.

0 Alternative products available

NNH4-65A-R3B-V1

12-port sector antenna, 4x 698–896 and 8x 1695–2360 MHz, 65° HPBW, 3x RET, 3x SBT.

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Features broadband Low Band (698-896 MHz) and High Band (1695-2360 MHz) arrays for 4T4R (4X MIMO) capability for 700 and 850 MHz, AWS, PCS and WCS applications
Non-stacked high band array design provides higher gain and narrower vertical beamwidth than traditional antenna designs
Independent RET for each pair of Arrays
Array configuration provides capability for 4T4R (4x MIMO) on Low band and Dual 4T4R (4x MIMO) on High band
Optimized SPR performance across all operating bands
Excellent wind loading characteristics
Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector body grounded to reflector and mounting bracket
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	3 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 5 \| Port 9
Internal RET	Low band (1) \| Mid band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	1499 mm \| 59.016 in
Net Weight, antenna only	33 kg \| 72.752 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1-R2	R1-R2	Y1-Y4	Y1-Y4	Y1-Y4	Y1-Y4
Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360
RF Port	1-4	1-4	5-12	5-12	5-12	5-12
Gain, dBi	13.3	13.3	16.3	17.0	17.5	18.2
Beamwidth, Horizontal, degrees	71	67	71	68	63	58
Beamwidth, Vertical, degrees	17.4	15.7	7.5	7	6.6	6
Beam Tilt, degrees	2–16	2–16	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	18	19	15	17	18	22
Front-to-Back Ratio at 180°, dB	35	32	35	37	34	32
Isolation, Cross Polarization, dB	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	200

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360
Gain by all Beam Tilts, average, dBi	12.8	13.1	15.8	16.6	17.1	17.8
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.4	±0.6	±0.5	±0.5	±0.5
Beamwidth, Horizontal Tolerance, degrees	±5	±2	±6	±7	±6	±3
Beamwidth, Vertical Tolerance, degrees	±1.4	±1.4	±0.5	±0.3	±0.4	±0.2
USLS, beampeak to 20° above beampeak, dB	19	21	14	16	16	17
Front-to-Back Total Power at 180° ± 30°, dB	24	23	27	26	26	26
CPR at Boresight, dB	25	24	24	26	25	22
CPR at Sector, dB	13	10	10	7	7	8

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.47 m² \| 5.059 ft²
Effective Projective Area (EPA), lateral	0.14 m² \| 1.507 ft²
Wind Loading @ Velocity, frontal	498.0 N @ 150 km/h (112.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	148.0 N @ 150 km/h (33.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	597.0 N @ 150 km/h (134.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	342.0 N @ 150 km/h (76.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	309 mm \| 12.165 in
Length, packed	1686 mm \| 66.378 in
Weight, gross	46.4 kg \| 102.294 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector body grounded to reflector and mounting bracket
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	3 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 5 \| Port 9
Internal RET	Low band (1) \| Mid band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	1499 mm \| 59.016 in
Net Weight, antenna only	33 kg \| 72.752 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz
Polarization	±45°
Total Input Power, maximum	900 W @ 50 °C

Electrical Specifications

	R1-R2	R1-R2	Y1-Y4	Y1-Y4	Y1-Y4	Y1-Y4
Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360
RF Port	1-4	1-4	5-12	5-12	5-12	5-12
Gain, dBi	13.3	13.3	16.3	17.0	17.5	18.2
Beamwidth, Horizontal, degrees	71	67	71	68	63	58
Beamwidth, Vertical, degrees	17.4	15.7	7.5	7	6.6	6
Beam Tilt, degrees	2–16	2–16	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	18	19	15	17	18	22
Front-to-Back Ratio at 180°, dB	35	32	35	37	34	32
Isolation, Cross Polarization, dB	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	200

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360
Gain by all Beam Tilts, average, dBi	12.8	13.1	15.8	16.6	17.1	17.8
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.4	±0.6	±0.5	±0.5	±0.5
Beamwidth, Horizontal Tolerance, degrees	±5	±2	±6	±7	±6	±3
Beamwidth, Vertical Tolerance, degrees	±1.4	±1.4	±0.5	±0.3	±0.4	±0.2
USLS, beampeak to 20° above beampeak, dB	19	21	14	16	16	17
Front-to-Back Total Power at 180° ± 30°, dB	24	23	27	26	26	26
CPR at Boresight, dB	25	24	24	26	25	22
CPR at Sector, dB	13	10	10	7	7	8

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.47 m² \| 5.059 ft²
Effective Projective Area (EPA), lateral	0.14 m² \| 1.507 ft²
Wind Loading @ Velocity, frontal	498.0 N @ 150 km/h (112.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	148.0 N @ 150 km/h (33.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	597.0 N @ 150 km/h (134.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	342.0 N @ 150 km/h (76.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	309 mm \| 12.165 in
Length, packed	1686 mm \| 66.378 in
Weight, gross	46.4 kg \| 102.294 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted