0 Alternative products available

LLPX310R-V1

4-port sector antenna, 4x 2300–2700 MHz, 65° HPBW, 2x RET with manual override

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Polyester fiberglass pultrusion
RF Connector Interface	7-16 DIN Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, total	4

RET Interface	8-pin DIN Male
RET Interface, quantity	1 male
Input Voltage	10–30 Vdc
Internal RET	High band (2)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	300 mm \| 11.811 in
Depth	115 mm \| 4.528 in
Length	1077 mm \| 42.402 in
Net Weight, without mounting kit	13 kg \| 28.660 lb

Click on image to enlarge.

Frequency Band, MHz	2300–2500	2500–2700
Gain, dBi	17.2	17.8
Beamwidth, Horizontal, degrees	65	63
Beamwidth, Vertical, degrees	7	6.5
Beam Tilt, degrees	0–10	0–10
USLS (First Lobe), dB	18	18
Front-to-Back Ratio at 180°, dB	30	30
Isolation, Cross Polarization, dB	30	30
VSWR \| Return loss, dB	1.43 \| 15.0	1.43 \| 15.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150
Input Power per Port, maximum, watts	250	250

Wind Loading @ Velocity, maximum	450.0 N @ 160 km/h (101.2 lbf @ 160 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant

Antenna Type	Sector
Band	Single band
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Polyester fiberglass pultrusion
RF Connector Interface	7-16 DIN Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, total	4

RET Interface	8-pin DIN Male
RET Interface, quantity	1 male
Input Voltage	10–30 Vdc
Internal RET	High band (2)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Width	300 mm \| 11.811 in
Depth	115 mm \| 4.528 in
Length	1077 mm \| 42.402 in
Net Weight, without mounting kit	13 kg \| 28.660 lb

Frequency Band, MHz	2300–2500	2500–2700
Gain, dBi	17.2	17.8
Beamwidth, Horizontal, degrees	65	63
Beamwidth, Vertical, degrees	7	6.5
Beam Tilt, degrees	0–10	0–10
USLS (First Lobe), dB	18	18
Front-to-Back Ratio at 180°, dB	30	30
Isolation, Cross Polarization, dB	30	30
VSWR \| Return loss, dB	1.43 \| 15.0	1.43 \| 15.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150
Input Power per Port, maximum, watts	250	250

Wind Loading @ Velocity, maximum	450.0 N @ 160 km/h (101.2 lbf @ 160 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Click on image to enlarge.

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant