Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

JAVV-33C-R3

8-port sector antenna, 2x 698–803, 2x 824-894 and 4x 1695–2690MHz, 33° HPBW, low bands each have a RET and high bands share a RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • One RET for 700MHz, one RET for 850MHz, and one RET for both high bands to ensure same tilt level for 4x Rx or 4x MIMO
  • Internal filter on low band and interleaved dipole technology providing for attractive, low wind load mechanical package
  • Narrow beamwidth capacity antenna for higher level of densification and enhanced data throughput

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 64 kg | 141.096 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 803 MHz | 824 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–803 824–894 1695–1880 1850–1990 1920–2200 2300–2690
Gain, dBi 18.3 19.0 20.0 20.3 20.8 21.7
Beamwidth, Horizontal, degrees 35 31 34 34 33 27
Beamwidth, Vertical, degrees 9.9 8.7 5.8 5.4 5.1 4.4
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 21 20 19 17 17 16
USLS (First Lobe), dB 17 18 18 17 18 20
Front-to-Back Ratio at 180°, dB 32 36 34 35 37 36
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–803 824–894 1695–1880 1850–1990 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 18.1 18.8 19.6 20.1 20.4 21.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.7 ±0.3 ±0.5 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±3.3 ±0.7 ±3.3 ±1 ±1.6 ±2.3
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.3 ±0.2 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 17 17 16 17 17 17
Front-to-Back Total Power at 180° ± 30°, dB 28 28 29 30 30 30
CPR at Boresight, dB 18 17 18 21 20 21
CPR at 10 dB Horizontal Beamwidth, dB 8 16 13 14 13 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,434.0 N @ 150 km/h (322.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 88 kg | 194.007 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 64 kg | 141.096 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 803 MHz | 824 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–803 824–894 1695–1880 1850–1990 1920–2200 2300–2690
Gain, dBi 18.3 19.0 20.0 20.3 20.8 21.7
Beamwidth, Horizontal, degrees 35 31 34 34 33 27
Beamwidth, Vertical, degrees 9.9 8.7 5.8 5.4 5.1 4.4
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 21 20 19 17 17 16
USLS (First Lobe), dB 17 18 18 17 18 20
Front-to-Back Ratio at 180°, dB 32 36 34 35 37 36
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–803 824–894 1695–1880 1850–1990 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 18.1 18.8 19.6 20.1 20.4 21.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.7 ±0.3 ±0.5 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±3.3 ±0.7 ±3.3 ±1 ±1.6 ±2.3
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.3 ±0.2 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 17 17 16 17 17 17
Front-to-Back Total Power at 180° ± 30°, dB 28 28 29 30 30 30
CPR at Boresight, dB 18 17 18 21 20 21
CPR at 10 dB Horizontal Beamwidth, dB 8 16 13 14 13 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,434.0 N @ 150 km/h (322.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 88 kg | 194.007 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification