HBXX-9014DS-VTM | HBXX-9014DS-A2M
4-port sector antenna, 4x 1710–2180 MHz, 90° HPBW, RET compatible
Specifications
Features and Benefits
- Enhanced control of out-of-sector power improves co-channel interference, reduces softer hand-offs, improves capacity
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | PVC, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| Model with Factory Installed AISG 2.0 Actuator | HBXX-9014DS-A2M |
Dimensions
| Width | 305 mm | 12.008 in |
| Depth | 166 mm | 6.535 in |
| Length | 1297 mm | 51.063 in |
| Net Weight, without mounting kit | 13.5 kg | 29.762 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 16.0 | 16.0 | 16.2 |
| Beamwidth, Horizontal, degrees | 88 | 88 | 88 |
| Beamwidth, Vertical, degrees | 7.5 | 7.1 | 6.7 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 17 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 30 | 30 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 420.0 N @ 150 km/h (94.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 113.0 N @ 150 km/h (25.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 488.0 N @ 150 km/h (109.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 292 mm | 11.496 in |
| Length, packed | 1609 mm | 63.346 in |
| Weight, gross | 22.1 kg | 48.722 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
CE
|
Compliant with the relevant CE product directives |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | PVC, UV resistant |
| Radiator Material | Low loss circuit board |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, mid band | 0 |
| RF Connector Quantity, low band | 0 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| Model with Factory Installed AISG 2.0 Actuator | HBXX-9014DS-A2M |
Dimensions
| Width | 305 mm | 12.008 in |
| Depth | 166 mm | 6.535 in |
| Length | 1297 mm | 51.063 in |
| Net Weight, without mounting kit | 13.5 kg | 29.762 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 1710 – 2180 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
| Gain, dBi | 16.0 | 16.0 | 16.2 |
| Beamwidth, Horizontal, degrees | 88 | 88 | 88 |
| Beamwidth, Vertical, degrees | 7.5 | 7.1 | 6.7 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 17 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 30 | 30 | 30 |
| Isolation, Cross Polarization, dB | 30 | 30 | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 | 1.4 | 15.6 | 1.4 | 15.6 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 420.0 N @ 150 km/h (94.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 113.0 N @ 150 km/h (25.4 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 488.0 N @ 150 km/h (109.7 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 409 mm | 16.102 in |
| Depth, packed | 292 mm | 11.496 in |
| Length, packed | 1609 mm | 63.346 in |
| Weight, gross | 22.1 kg | 48.722 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
|
CE
|
Compliant with the relevant CE product directives |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Included Products
Antennas
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
600899A-2 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products
Antennas
-
![]()
ATM200-A20 Actuator, AISG 2.0 default protocol
Other Ways to Browse
