SA-ISO
Base Product: SSH-SERIES-HANGERS
PIM-Guard®, PIM-free, isolator snaps in between hanger and mounting surface, and between stacked hangers to remove metal to metal contact
Specifications
Product Classification
| Product Type | Adapter |
| Product Brand | PIM-Guard® |
| Ordering Note | CommScope® standard product (Global) |
General Specifications
| Accessories | Adapters |
| Color | Black |
| Hanger Type | Snap-in hanger |
| Mounting | 3/4 in drilled cable ladder | 3/4 in through hole |
Dimensions
| Height | 26.9 mm | 1.059 in |
| Width | 43.94 mm | 1.730 in |
| Length | 3.56 mm | 0.140 in |
| Nominal Size | NA |
Electrical Specifications
| Return Loss Effect, maximum | 0.1 dB |
| DTF Effect, maximum | 0.1 dB |
Material Specifications
| Material Type | Engineered plastic |
Mechanical Specifications
| Maximum Loading | Double stack for hangers SSH-M, SSH-L, SSH-XL | Double stack, 1-5/8 in cable | Triple stack, 1/2 in cable |
| Vibration Survival | ≥4 hours at resonant frequency |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Environmental Strength Capability | Double cable weight |
| UV Resistance, minimum with no degradation | ≥1000 hours exposure in accelerated UV life chamber |
Packaging and Weights
| Height, packed | 17 cm | 6.693 in |
| Width, packed | 13 cm | 5.118 in |
| Length, packed | 10 cm | 3.937 in |
| Packaging quantity | 10 |
| Weight, gross | 0.15 kg | 0.331 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
CHINA-ROHS
|
Below maximum concentration value |
Product Classification
| Product Type | Adapter |
| Product Brand | PIM-Guard® |
| Ordering Note | CommScope® standard product (Global) |
General Specifications
| Accessories | Adapters |
| Color | Black |
| Hanger Type | Snap-in hanger |
| Mounting | 3/4 in drilled cable ladder | 3/4 in through hole |
Dimensions
| Height | 26.9 mm | 1.059 in |
| Width | 43.94 mm | 1.730 in |
| Length | 3.56 mm | 0.140 in |
| Nominal Size | NA |
Electrical Specifications
| Return Loss Effect, maximum | 0.1 dB |
| DTF Effect, maximum | 0.1 dB |
Material Specifications
| Material Type | Engineered plastic |
Mechanical Specifications
| Maximum Loading | Double stack for hangers SSH-M, SSH-L, SSH-XL | Double stack, 1-5/8 in cable | Triple stack, 1/2 in cable |
| Vibration Survival | ≥4 hours at resonant frequency |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Environmental Strength Capability | Double cable weight |
| UV Resistance, minimum with no degradation | ≥1000 hours exposure in accelerated UV life chamber |
Packaging and Weights
| Height, packed | 17 cm | 6.693 in |
| Width, packed | 13 cm | 5.118 in |
| Length, packed | 10 cm | 3.937 in |
| Packaging quantity | 10 |
| Weight, gross | 0.15 kg | 0.331 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
|
CHINA-ROHS
|
Below maximum concentration value |
Documentation & Downloads
Installation Instruction
Ordering Guide
Product Specification
Video
PIM-Guard™ Solutions
PIM-Guard™ Solutions
SnapTak installation: How to install the various SnapTak cable hangers
SnapTak removal tool: How to quickly and easily remove SnapTak hangers
Warranty
Installation Instruction
Ordering Guide
Product Compliance Documentation
Product Specification
Technical Publication
Video
PIM-Guard™ Solutions
PIM-Guard™ Solutions
SnapTak installation: How to install the various SnapTak cable hangers
SnapTak removal tool: How to quickly and easily remove SnapTak hangers
Warranty
Related Products and Accessories
Related Products
Structural Support, Tools & Accessories
-
![]()
CB-12-50 Cable Banding, Bulk, 1/2 in x 50 ft Reel (uses CB-LH-25 Locking Heads - not incl) -
![]()
CB-LH-25 Locking Heads for Cable Banding CB-12-50, 25 pcs (uses CB-IT installation tool - not incl) -
![]()
SA-1C PIM-Guard®, Single-Way Snap-in Stand-off Adapter has a two slots for round member attachment. It includes one 3/4" hole for Snap-in hangers, supporting three stacks for 4-17mm or two stacks for 26-40mm cables -
![]()
SA-1TR PIM-Guard® Multifunction Adapter that threads into 3/8" & 1/2" bolts & U-bolts or snaps into 3/4" holes. One 3/4" hole for Snap-in style hangers, supporting three stacks for 4-17mm or two stacks for 26-40mm cables -
![]()
SA-3C PIM-Guard® Three-Way Snap-in Stand-off Adapter has two slots for round member attachment and 3/8" holes for angle adapter integration. It includes three 3/4" holes for Snap-in hangers, supporting three 4-17mm or two 26-42mm cable stacks per hole -
![]()
UA-3C PIM-Guard®, PIM free, Angle member attachment. Includes torque stop set bolt to ensure proper attachment force. Two 3/4" holes for Snap-in style hangers -
![]()
UHA-3C PIM-Guard®, Universal Three-Way Stand-off Adapter. Mounts snap-in hangers, grommets, and threaded rods onto towers with round members or 1/4" and 3/8" angle members, supporting three stacks for 4-17mm or two stacks for 26-40mm cables
-
![]()
STRT-1 SnapTak Hanger Removal Tool Pliers designed to compress SnapTak Hangers and SA-1TR adapters for easy removal from mounting surfaces. Made of tool grade steel with rubber handles.
-
![]()
ACS-D24 Antenna and RRU Cable Support Bracket for up to 24 Cables -
![]()
PG-CS08 PIM-Guard® Antenna and RRU Cable Support Bracket with 8 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 10 to 15 ft-lb to meet carrier PIM requirements.For patents, see www.cs-pat.com -
![]()
PG-CS23 PIM-Guard® Antenna and RRU Cable Support Bracket with 23 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 10 to 15 ft-lb to meet carrier PIM requirements. For patents, see www.cs-pat.com -
![]()
PG-CSEB17 PIM-Guard® Expansion Bracket - expands PG-CS08 Cable Support Bracket to 23 Ports. For patents, see www.cs-pat.com -
![]()
PG-RM06 PIM-Guard® Round Member Cable Support Bracket 6 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 5 to 7 ft-lb to meet carrier PIM requirements. For patents, see www.cs-pat.com -
![]()
PGP-CS04 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 4 positions / 8 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS08 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 8 positions / 16 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS10 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 10 positions / 20 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS12 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 12 positions / 24 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS16 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 16 positions / 32 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS18 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 18 positions / 36 cables for stackable hangers (up to 2 per position)
Related Products
Structural Support, Tools & Accessories
-
![]()
CB-12-50 Cable Banding, Bulk, 1/2 in x 50 ft Reel (uses CB-LH-25 Locking Heads - not incl) -
![]()
CB-LH-25 Locking Heads for Cable Banding CB-12-50, 25 pcs (uses CB-IT installation tool - not incl) -
![]()
SA-1C PIM-Guard®, Single-Way Snap-in Stand-off Adapter has a two slots for round member attachment. It includes one 3/4" hole for Snap-in hangers, supporting three stacks for 4-17mm or two stacks for 26-40mm cables -
![]()
SA-1TR PIM-Guard® Multifunction Adapter that threads into 3/8" & 1/2" bolts & U-bolts or snaps into 3/4" holes. One 3/4" hole for Snap-in style hangers, supporting three stacks for 4-17mm or two stacks for 26-40mm cables -
![]()
SA-3C PIM-Guard® Three-Way Snap-in Stand-off Adapter has two slots for round member attachment and 3/8" holes for angle adapter integration. It includes three 3/4" holes for Snap-in hangers, supporting three 4-17mm or two 26-42mm cable stacks per hole -
![]()
UA-3C PIM-Guard®, PIM free, Angle member attachment. Includes torque stop set bolt to ensure proper attachment force. Two 3/4" holes for Snap-in style hangers -
![]()
UHA-3C PIM-Guard®, Universal Three-Way Stand-off Adapter. Mounts snap-in hangers, grommets, and threaded rods onto towers with round members or 1/4" and 3/8" angle members, supporting three stacks for 4-17mm or two stacks for 26-40mm cables
-
![]()
STRT-1 SnapTak Hanger Removal Tool Pliers designed to compress SnapTak Hangers and SA-1TR adapters for easy removal from mounting surfaces. Made of tool grade steel with rubber handles.
-
![]()
ACS-D24 Antenna and RRU Cable Support Bracket for up to 24 Cables -
![]()
PG-CS08 PIM-Guard® Antenna and RRU Cable Support Bracket with 8 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 10 to 15 ft-lb to meet carrier PIM requirements.For patents, see www.cs-pat.com -
![]()
PG-CS23 PIM-Guard® Antenna and RRU Cable Support Bracket with 23 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 10 to 15 ft-lb to meet carrier PIM requirements. For patents, see www.cs-pat.com -
![]()
PG-CSEB17 PIM-Guard® Expansion Bracket - expands PG-CS08 Cable Support Bracket to 23 Ports. For patents, see www.cs-pat.com -
![]()
PG-RM06 PIM-Guard® Round Member Cable Support Bracket 6 ports for stackable hangers (up to 3 per port). Install with torque wrench set at 5 to 7 ft-lb to meet carrier PIM requirements. For patents, see www.cs-pat.com -
![]()
PGP-CS04 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 4 positions / 8 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS08 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 8 positions / 16 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS10 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 10 positions / 20 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS12 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 12 positions / 24 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS16 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 16 positions / 32 cables for stackable hangers (up to 2 per position) -
![]()
PGP-CS18 Polymer PIM-Guard® Antenna and RRU Cable Support Bracket with 18 positions / 36 cables for stackable hangers (up to 2 per position)
Other Ways to Browse
