223700-724
Base Product: GROUNDING-SERIES
Standard Grounding Kit for 2-1/4 in and 3 in corrugated coaxial cable and elliptical waveguide 28 and 37
Specifications
Product Classification
| Product Type | Grounding kit |
| Product Brand | HELIAX® |
| Ordering Note | CommScope® non-standard product |
General Specifications
| Bonding Conductor Jacketing Material | PVC |
| Bonding Conductor Material | Copper |
| Bonding Conductor Wire Size | 6 gauge |
| Cable Type | Corrugated | Elliptical waveguide |
| Color | Black |
| Grounding Kit Type | Standard Grounding Kits |
| Grounding Strap Material | Copper |
| Lug Attachment | Field attached |
| Lug Type | Two-hole lug |
| Thread Size | 3/8 in |
Dimensions
| Bonding Conductor Length | 1524 mm | 60 in |
| Cable Jacketing Removal Length, maximum | 58.42 mm | 2.3 in |
| Cable Jacketing Removal Length, minimum | 55.88 mm | 2.2 in |
| Compatible Diameter, maximum | 78.74 mm | 3.1 in |
| Compatible Diameter, minimum | 58.674 mm | 2.31 in |
| Nominal Size | 2-1/4 in | 3 in |
| Waveguide Size | WR229 | WG11 | R40 | WR284 | WG10 | R32 |
Electrical Specifications
| Current Handling | Tested to withstand 100,000 amps peak current surge |
| Current Handling Test Method | MIL-STD-1757 |
| Grounding, Bonding and Shielding Test Method | MIL-STD-188-124A |
| Lightning Protection Test Method | IEC 1024-1 |
Material Specifications
| Rivet Material | Copper |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Storage Temperature | -40 °C to +80 °C (-40 °F to +176 °F) |
| Blowing Rain Test Method | MIL-STD-810, Method 506 |
| Corrosion Test Method | MIL-STD-1344, Method 1001 |
| Freezing Rain/Icing Test Method | MIL-STD-810, Method 521 |
| Humidity Test Method | MIL-STD-1344, Method 1002 |
| Immersion Test Method | IEC 60529:2001, IP68 |
| UV Resistance Test Method | MIL-STD-810, Method 505 |
| Vibration Test Method | MIL-STD-202, Method 214 |
| Weatherproofing Method | Butyl and electric tape |
Packaging and Weights
| Height, packed | 269.24 mm | 10.6 in |
| Width, packed | 58.42 mm | 2.3 in |
| Length, packed | 177.8 mm | 7 in |
| Included | Grounding kit | Hardware | Lug | One roll of 2 in PVC tape | One roll of 24 in butyl rubber tape |
| Packaging quantity | 1 |
| Weight, gross | 0.92 kg | 2.028 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Product Classification
| Product Type | Grounding kit |
| Product Brand | HELIAX® |
| Ordering Note | CommScope® non-standard product |
General Specifications
| Bonding Conductor Jacketing Material | PVC |
| Bonding Conductor Material | Copper |
| Bonding Conductor Wire Size | 6 gauge |
| Cable Type | Corrugated | Elliptical waveguide |
| Color | Black |
| Grounding Kit Type | Standard Grounding Kits |
| Grounding Strap Material | Copper |
| Lug Attachment | Field attached |
| Lug Type | Two-hole lug |
| Thread Size | 3/8 in |
Dimensions
| Bonding Conductor Length | 1524 mm | 60 in |
| Cable Jacketing Removal Length, maximum | 58.42 mm | 2.3 in |
| Cable Jacketing Removal Length, minimum | 55.88 mm | 2.2 in |
| Compatible Diameter, maximum | 78.74 mm | 3.1 in |
| Compatible Diameter, minimum | 58.674 mm | 2.31 in |
| Nominal Size | 2-1/4 in | 3 in |
| Waveguide Size | WR229 | WG11 | R40 | WR284 | WG10 | R32 |
Electrical Specifications
| Current Handling | Tested to withstand 100,000 amps peak current surge |
| Current Handling Test Method | MIL-STD-1757 |
| Grounding, Bonding and Shielding Test Method | MIL-STD-188-124A |
| Lightning Protection Test Method | IEC 1024-1 |
Material Specifications
| Rivet Material | Copper |
Environmental Specifications
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Storage Temperature | -40 °C to +80 °C (-40 °F to +176 °F) |
| Blowing Rain Test Method | MIL-STD-810, Method 506 |
| Corrosion Test Method | MIL-STD-1344, Method 1001 |
| Freezing Rain/Icing Test Method | MIL-STD-810, Method 521 |
| Humidity Test Method | MIL-STD-1344, Method 1002 |
| Immersion Test Method | IEC 60529:2001, IP68 |
| UV Resistance Test Method | MIL-STD-810, Method 505 |
| Vibration Test Method | MIL-STD-202, Method 214 |
| Weatherproofing Method | Butyl and electric tape |
Packaging and Weights
| Height, packed | 269.24 mm | 10.6 in |
| Width, packed | 58.42 mm | 2.3 in |
| Length, packed | 177.8 mm | 7 in |
| Included | Grounding kit | Hardware | Lug | One roll of 2 in PVC tape | One roll of 24 in butyl rubber tape |
| Packaging quantity | 1 |
| Weight, gross | 0.92 kg | 2.028 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Installation Instruction
Product Specification
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Warranty
Related Products and Accessories
Included Products
Structural Support, Tools & Accessories
Related Products
Antennas
-
![]()
EW37 EW37, HELIAX® Standard Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37-34 EWP37, HELIAX® Premium Elliptical Waveguide, 3.4–3.9 GHz, black PE jacket -
![]()
EWP37-36 EWP37, HELIAX® Premium Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37S EWP37, HELIAX® Super Premium Elliptical Waveguide, 3.7–4.2 GHz, black PE jacket
Cable Assemblies
-
![]()
APT-BDFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Female -
![]()
APT-BDFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Male -
![]()
APT-DFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped) with interface types DIN Female and DIN Female -
![]()
APT-DFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
APT-NFNF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 800–2170 MHz, with interface types N Female and N Female -
![]()
APT-NFNM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 806–2170 MHz, with interface types N Female and N Male
Cables
-
![]()
EW37 EW37, HELIAX® Standard Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37-34 EWP37, HELIAX® Premium Elliptical Waveguide, 3.4–3.9 GHz, black PE jacket -
![]()
EWP37-36 EWP37, HELIAX® Premium Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37S EWP37, HELIAX® Super Premium Elliptical Waveguide, 3.7–4.2 GHz, black PE jacket
Structural Support, Tools & Accessories
-
![]()
UGBKIT-0210 Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0210-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0212 Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0212-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0214 Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0214-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0412 Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0412-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0414 Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0414-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0420 Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0420-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0424 Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-0424-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-2 Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-2T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm)
-
![]()
GND-1M Ground Lead with Lugs, 1.08 meter
Included Products
Structural Support, Tools & Accessories
Related Products
Antennas
-
![]()
EW37 EW37, HELIAX® Standard Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37-34 EWP37, HELIAX® Premium Elliptical Waveguide, 3.4–3.9 GHz, black PE jacket -
![]()
EWP37-36 EWP37, HELIAX® Premium Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37S EWP37, HELIAX® Super Premium Elliptical Waveguide, 3.7–4.2 GHz, black PE jacket
Cable Assemblies
-
![]()
APT-BDFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Female -
![]()
APT-BDFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female Bulkhead and DIN Male -
![]()
APT-DFDF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped) with interface types DIN Female and DIN Female -
![]()
APT-DFDM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped), 806–960 MHz and 1700–2170 MHz, with interface types DIN Female and DIN Male -
![]()
APT-NFNF-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 800–2170 MHz, with interface types N Female and N Female -
![]()
APT-NFNM-DB Arrestor Plus® Dual Band Quarterwave Surge Arrestor (T-shaped, Cylindrical), 806–2170 MHz, with interface types N Female and N Male
Cables
-
![]()
EW37 EW37, HELIAX® Standard Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37-34 EWP37, HELIAX® Premium Elliptical Waveguide, 3.4–3.9 GHz, black PE jacket -
![]()
EWP37-36 EWP37, HELIAX® Premium Elliptical Waveguide, 3.6–4.2 GHz, black PE jacket -
![]()
EWP37S EWP37, HELIAX® Super Premium Elliptical Waveguide, 3.7–4.2 GHz, black PE jacket
Structural Support, Tools & Accessories
-
![]()
UGBKIT-0210 Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0210-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 10 in (6.4 mm x 50.8 mm x 254.0 mm) -
![]()
UGBKIT-0212 Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0212-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 12 in (6.4 mm x 50.8 mm x 304.8 mm) -
![]()
UGBKIT-0214 Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0214-T Tinned Copper Ground Buss Bar, 1/4 in x 2 in x 14 in (6.4 mm x 50.8 mm x 355.6 mm) -
![]()
UGBKIT-0412 Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0412-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 12 in (6.4 mm x 101.6 mm x 304.8 mm) -
![]()
UGBKIT-0414 Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0414-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 14 in (6.4 mm x 101.6 mm x 355.6 mm) -
![]()
UGBKIT-0420 Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0420-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 20 in (6.4 mm x 101.6 mm x 508.0 mm) -
![]()
UGBKIT-0424 Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-0424-T Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 24 in (6.4 mm x 101.6 mm x 609.8 mm) -
![]()
UGBKIT-2 Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-2T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 12-1/2 in (6.4 mm x 63.5 mm x 317.5 mm) -
![]()
UGBKIT-T Tinned Copper Ground Buss Bar, 1/4 in x 2-1/2 in x 19-1/2 in (6.4 mm x 63.5 mm x 495.3 mm)
-
![]()
GND-1M Ground Lead with Lugs, 1.08 meter
Other Ways to Browse
