0 Alternative products available

R-33D-R1VB

2-port sector antenna, 2x 694–960, 33° HPBW, 1x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	2
RF Connector Quantity, total	2

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Click on image to enlarge.

Click on image to enlarge.

	R1	R1	R1
Frequency Band, MHz	698–806	790–894	890–960
RF Port	1,2	1,2	1,2
Gain, dBi	19.1	19.5	20.0
Beamwidth, Horizontal, degrees	37	33	32
Beamwidth, Vertical, degrees	8.8	7.8	7.4
Beam Tilt, degrees	2–12	2–12	2–12
USLS (First Lobe), dB	22	21	22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	36	33	33
Isolation, Cross Polarization, dB	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150
Input Power per Port, maximum, watts	300	300	300

Frequency Band, MHz	698–806	790–894	890–960
Gain by all Beam Tilts, average, dBi	18.8	19.3	19.7
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.2	±0.4
Beamwidth, Horizontal Tolerance, degrees	±2	±2	±1
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4
CPR at Boresight, dB	22	25	23

Wind Loading @ Velocity, frontal	754.0 N @ 150 km/h (169.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	2
RF Connector Quantity, total	2

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

	R1	R1	R1
Frequency Band, MHz	698–806	790–894	890–960
RF Port	1,2	1,2	1,2
Gain, dBi	19.1	19.5	20.0
Beamwidth, Horizontal, degrees	37	33	32
Beamwidth, Vertical, degrees	8.8	7.8	7.4
Beam Tilt, degrees	2–12	2–12	2–12
USLS (First Lobe), dB	22	21	22
Front-to-Back Ratio, Copolarization 180° ± 30°, dB	36	33	33
Isolation, Cross Polarization, dB	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150
Input Power per Port, maximum, watts	300	300	300

Frequency Band, MHz	698–806	790–894	890–960
Gain by all Beam Tilts, average, dBi	18.8	19.3	19.7
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.2	±0.4
Beamwidth, Horizontal Tolerance, degrees	±2	±2	±1
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.5	±0.4
CPR at Boresight, dB	22	25	23

Wind Loading @ Velocity, frontal	754.0 N @ 150 km/h (169.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)