For other alternatives, please contact us for more information.

0 Alternative products available

NNH4SS-45A-R3BT8

16-port sector antenna, 4x 698–896, 8x 1695–2360 and 4x 3550- 3700 MHz, 45° HPBW, 3x RETs and 3x SBTs.

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Features broadband Low Band (698-896 MHz), Mid Band(1695-2360 MHz) and High Band (3550-3700 MHz) arrays for 4T4R (4X MIMO) capability for bands 5, 13, 25, 66 and 48. Also covers bands 12, 14, 29, and 30
Perfect antenna to add 3.5GHz CBRS to macro sites
Array configuration provides capability for 4T4R (4X MIMO) on Low Band, dual 4T4R (4X MIMO) on Mid Band and 4T4R (4X MIMO) on High Band
Excellent wind loading characteristics
Non-stacked mid band array design provides higher gain and narrower vertical beamwidth than traditional antenna designs

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	16

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	3 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 5 \| Port 7
Internal RET	Low band (1) \| Mid band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	457 mm \| 17.992 in
Depth	178 mm \| 7.008 in
Length	1399 mm \| 55.079 in
Net Weight, antenna only	29.5 kg \| 65.036 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz \| 3550 – 3700 MHz
Polarization	±45°
Total Input Power, maximum	1,600 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3550–3700
Gain, dBi	12.7	13.3	15.3	15.7	16.3	16.5	15.0
Beamwidth, Horizontal, degrees	48	44	44	41	39	37	45
Beamwidth, Vertical, degrees	36	30.4	14.5	13.6	12.8	11.1	15.6
Beam Tilt, degrees	2–18	2–18	0–10	0–10	0–10	0–10	8
USLS (First Lobe), dB	19	17	16	17	16	15	16
Front-to-Back Ratio at 180°, dB	33	30	31	32	31	30	31
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-145
Input Power per Port at 50°C, maximum, watts	300	300	250	250	250	200	100

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3550–3700
Gain by all Beam Tilts, average, dBi	12.1	13.0	14.7	15.3	15.8	16.0	14.5
Gain by all Beam Tilts Tolerance, dB	±0.8	±0.5	±0.8	±0.6	±0.7	±0.6	±1.6
Beamwidth, Horizontal Tolerance, degrees	±3	±2.8	±3.7	±2.5	±3.1	±3	±4.3
Beamwidth, Vertical Tolerance, degrees	±3.5	±2.6	±1.1	±0.8	±1	±0.7	±1.2
Front-to-Back Total Power at 180° ± 30°, dB	25	23	23	25	25	25	32
CPR at Boresight, dB	20	20	17	18	18	20	14
CPR at 10 dB Horizontal Beamwidth, dB	14	12	7	9	10	11	10

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.74 m² \| 7.965 ft²
Effective Projective Area (EPA), lateral	0.15 m² \| 1.615 ft²
Wind Loading @ Velocity, frontal	788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	563 mm \| 22.165 in
Depth, packed	355 mm \| 13.976 in
Length, packed	1572 mm \| 61.890 in
Weight, gross	42 kg \| 92.594 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	16

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	3 female \| 3 male
Input Voltage	10–30 Vdc
Internal Bias Tee	Port 1 \| Port 5 \| Port 7
Internal RET	Low band (1) \| Mid band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	457 mm \| 17.992 in
Depth	178 mm \| 7.008 in
Length	1399 mm \| 55.079 in
Net Weight, antenna only	29.5 kg \| 65.036 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2360 MHz \| 3550 – 3700 MHz
Polarization	±45°
Total Input Power, maximum	1,600 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3550–3700
Gain, dBi	12.7	13.3	15.3	15.7	16.3	16.5	15.0
Beamwidth, Horizontal, degrees	48	44	44	41	39	37	45
Beamwidth, Vertical, degrees	36	30.4	14.5	13.6	12.8	11.1	15.6
Beam Tilt, degrees	2–18	2–18	0–10	0–10	0–10	0–10	8
USLS (First Lobe), dB	19	17	16	17	16	15	16
Front-to-Back Ratio at 180°, dB	33	30	31	32	31	30	31
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-145
Input Power per Port at 50°C, maximum, watts	300	300	250	250	250	200	100

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2180	2300–2360	3550–3700
Gain by all Beam Tilts, average, dBi	12.1	13.0	14.7	15.3	15.8	16.0	14.5
Gain by all Beam Tilts Tolerance, dB	±0.8	±0.5	±0.8	±0.6	±0.7	±0.6	±1.6
Beamwidth, Horizontal Tolerance, degrees	±3	±2.8	±3.7	±2.5	±3.1	±3	±4.3
Beamwidth, Vertical Tolerance, degrees	±3.5	±2.6	±1.1	±0.8	±1	±0.7	±1.2
Front-to-Back Total Power at 180° ± 30°, dB	25	23	23	25	25	25	32
CPR at Boresight, dB	20	20	17	18	18	20	14
CPR at 10 dB Horizontal Beamwidth, dB	14	12	7	9	10	11	10

Mechanical Specifications

Effective Projective Area (EPA), frontal	0.74 m² \| 7.965 ft²
Effective Projective Area (EPA), lateral	0.15 m² \| 1.615 ft²
Wind Loading @ Velocity, frontal	788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	159.0 N @ 150 km/h (35.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	692.0 N @ 150 km/h (155.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	563 mm \| 22.165 in
Depth, packed	355 mm \| 13.976 in
Length, packed	1572 mm \| 61.890 in
Weight, gross	42 kg \| 92.594 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS	Compliant