Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

4P-4L-C2-V5

4-port sector antenna, 4x 694–960 MHz, 65° HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Symmetrical 2L Arrays: Ensuring pattern consistency across ports and enabling 4T4R (4x MIMO) on the low band
  • Optimized Radome Design: Leading to market-leading wind load performance
  • Integrated Features: Antenna equipped with tilt scale indicators and an integrated pluggable RET

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 427 mm | 16.811 in
Depth 157 mm | 6.181 in
Length 2497 mm | 98.307 in
Net Weight, antenna only 22.4 kg | 49.383 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 800 W

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–803 790–894 880–960
RF Port 1-4 1-4 1-4
Gain, dBi 15.9 16.4 16.6
Beamwidth, Horizontal, degrees 68 60 56
Beamwidth, Vertical, degrees 8.6 7.7 7.3
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 15 15 15
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 24 25 25
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 965.0 N @ 150 km/h (216.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 402.0 N @ 150 km/h (90.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,174.0 N @ 150 km/h (263.9 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 502 mm | 19.764 in
Depth, packed 232 mm | 9.134 in
Length, packed 2737 mm | 107.756 in
Weight, gross 33.7 kg | 74.296 lb

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 427 mm | 16.811 in
Depth 157 mm | 6.181 in
Length 2497 mm | 98.307 in
Net Weight, antenna only 22.4 kg | 49.383 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz
Polarization ±45°
Total Input Power, maximum 800 W

Electrical Specifications

R1,R2 R1,R2 R1,R2
Frequency Band, MHz 694–803 790–894 880–960
RF Port 1-4 1-4 1-4
Gain, dBi 15.9 16.4 16.6
Beamwidth, Horizontal, degrees 68 60 56
Beamwidth, Vertical, degrees 8.6 7.7 7.3
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 15 15 15
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 24 25 25
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150
Input Power per Port, maximum, watts 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 965.0 N @ 150 km/h (216.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 402.0 N @ 150 km/h (90.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,174.0 N @ 150 km/h (263.9 lbf @ 150 km/h)
Wind Speed, maximum 200 km/h (124 mph)

Packaging and Weights

Width, packed 502 mm | 19.764 in
Depth, packed 232 mm | 9.134 in
Length, packed 2737 mm | 107.756 in
Weight, gross 33.7 kg | 74.296 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification