Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

EGRZVS4-65D-R6N43

18-port sector antenna, 2x 694-862 (R1), 2x 880-960 (R2), 2x 694- 960 (R3), 2x 1427-2690 (Y2) & 2x 1695-2690 (Y1) MHz, 65° HPBW and 8x 3300-3800 (P1) MHz, 90° HPBW, 6x RET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Includes 1x 4-Column Array for 3300-3800MHz and calibration port. Column spacing optimized to support Soft Split Beamforming
  • Retractable tilt indicator rods
  • S4 array uses MQ cluster connectors
  • Includes six internal RET’s
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • Antenna shape optimized for wind load reduction

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 6
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1) | Low band (3) | Mid band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2769 mm | 109.016 in
Net Weight, without mounting kit 53.3 kg | 117.506 lb
TDD Column Spacing 42 mm | 1.654 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 694 – 960 MHz | 880 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 15.5 16.3 16.3 16.3 17.3 17.6 17.4 18.1 15.9
Beamwidth, Horizontal, degrees 60 53 58 55 58 66 57 55 91
Beamwidth, Vertical, degrees 7.5 6.4 7 7.2 5.6 4.4 6.1 5 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 17 20 20 20 15 17 16
Front-to-Back Ratio at 180°, dB 31 30 30 32 30 32 30 32 30
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27 25
Isolation, Inter-band, dB 27 27 27 27 27 27 27 27 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -130
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150 75

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 17.7
Beamwidth, Horizontal, degrees 29
Beamwidth, Vertical, degrees 6.1
Front-to-Back Total Power at 180° ± 30°, dB 26
USLS (First Lobe), dB 20

Electrical Specifications, Service Beam

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Steered 0° Gain, dBi 20.7
Steered 0° Beamwidth, Horizontal, degrees 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 29
Steered 0° Horizontal Sidelobe, dB 14
Steered 30° Gain, dBi 19.4
Steered 30° Beamwidth, Horizontal, degrees 30
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 27
Steered 30° Horizontal Sidelobe, dB 9

Electrical Specifications, Soft Split

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 19.6
Beamwidth, Horizontal, degrees 31
Horizontal Sidelobe, dB 19

Mechanical Specifications

Wind Loading @ Velocity, frontal 680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 356 mm | 14.016 in
Length, packed 2897 mm | 114.055 in
Weight, gross 73.7 kg | 162.480 lb

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female | MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 6
RF Connector Quantity, total 18

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1) | Low band (3) | Mid band (2)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 2769 mm | 109.016 in
Net Weight, without mounting kit 53.3 kg | 117.506 lb
TDD Column Spacing 42 mm | 1.654 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 694 – 960 MHz | 880 – 960 MHz | 1427 – 2690 MHz | 1695 – 2690 MHz | 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 15.5 16.3 16.3 16.3 17.3 17.6 17.4 18.1 15.9
Beamwidth, Horizontal, degrees 60 53 58 55 58 66 57 55 91
Beamwidth, Vertical, degrees 7.5 6.4 7 7.2 5.6 4.4 6.1 5 6.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 16 17 20 20 20 15 17 16
Front-to-Back Ratio at 180°, dB 31 30 30 32 30 32 30 32 30
Coupling level, Amp, Antenna port to Cal port, dB 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7
Isolation, Cross Polarization, dB 27 27 27 26 26 26 27 27 25
Isolation, Inter-band, dB 27 27 27 27 27 27 27 27 25
Isolation, Co-polarization, dB 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153 -130
Input Power per Port at 50°C, maximum, watts 250 250 250 200 200 150 200 150 75

Electrical Specifications, Broadcast 65

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 17.7
Beamwidth, Horizontal, degrees 29
Beamwidth, Vertical, degrees 6.1
Front-to-Back Total Power at 180° ± 30°, dB 26
USLS (First Lobe), dB 20

Electrical Specifications, Service Beam

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Steered 0° Gain, dBi 20.7
Steered 0° Beamwidth, Horizontal, degrees 24
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 29
Steered 0° Horizontal Sidelobe, dB 14
Steered 30° Gain, dBi 19.4
Steered 30° Beamwidth, Horizontal, degrees 30
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 27
Steered 30° Horizontal Sidelobe, dB 9

Electrical Specifications, Soft Split

Frequency Band, MHz 694–862 880–960 694–960 1427–1518 1695–2180 2300–2690 1695–2200 2300–2690 3300–3800
Gain, dBi 19.6
Beamwidth, Horizontal, degrees 31
Horizontal Sidelobe, dB 19

Mechanical Specifications

Wind Loading @ Velocity, frontal 680.0 N @ 150 km/h (152.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 347.0 N @ 150 km/h (78.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,020.0 N @ 150 km/h (229.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 434.0 N @ 150 km/h (97.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 356 mm | 14.016 in
Length, packed 2897 mm | 114.055 in
Weight, gross 73.7 kg | 162.480 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification