Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2VV-33C-R4-V6

8-port multibeam antenna, 8x 1695–2690 MHz, 4x 33° HPBW, 4x RET, has tilt scales

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity and spectrum utilization when used in six sector applications
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs – 3 antennas required for 6 sector configurations

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 0
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET High band (4)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2499 mm | 98.386 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 19.1 19.3 19.2 19.6 19.6
Gain at Mid Tilt, dBi 18.6 19.0 19.2 19.3 19.4
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 39 38 37 34 31
Beamwidth, Vertical, degrees 7.8 7.3 7 6.2 5.8
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 19 20 20 18 17
USLS (First Lobe), dB 15 15 15 18 18
Front-to-Back Ratio at 180°, dB 33 39 39 36 32
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Beam to Beam, dB 30 30 30 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.49 m² | 5.274 ft²
Effective Projective Area (EPA), lateral 0.36 m² | 3.875 ft²
Wind Loading @ Velocity, frontal 525.0 N @ 150 km/h (118.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 386.0 N @ 150 km/h (86.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 898.0 N @ 150 km/h (201.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Weight, gross 43.8 kg | 96.562 lb
Weight, net 29.8 kg | 65.698 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 0
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET High band (4)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 2499 mm | 98.386 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 19.1 19.3 19.2 19.6 19.6
Gain at Mid Tilt, dBi 18.6 19.0 19.2 19.3 19.4
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 39 38 37 34 31
Beamwidth, Vertical, degrees 7.8 7.3 7 6.2 5.8
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
Horizontal Sidelobe, dB 19 20 20 18 17
USLS (First Lobe), dB 15 15 15 18 18
Front-to-Back Ratio at 180°, dB 33 39 39 36 32
Isolation, Cross Polarization, dB 30 30 30 30 30
Isolation, Beam to Beam, dB 30 30 30 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.49 m² | 5.274 ft²
Effective Projective Area (EPA), lateral 0.36 m² | 3.875 ft²
Wind Loading @ Velocity, frontal 525.0 N @ 150 km/h (118.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 386.0 N @ 150 km/h (86.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 898.0 N @ 150 km/h (201.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Weight, gross 43.8 kg | 96.562 lb
Weight, net 29.8 kg | 65.698 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification