AGB240 | AGB240 ASI to Gigabit Ethernet Bridge

Available in:
Asia
Australia/New Zealand
EMEA
Latin America
North America

ASI to Gigabit Ethernet Bridge

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

The AGB240 ASI to Gigabit Ethernet (GigE) Bridge enables service providers to cost-effectively migrate legacy ASI video equipment to IP networks in headend environments.

AGB240 delivers highly reliable bridging of traffic from ASI video service outputs in legacy equipment, such as satellite receivers (IRDs), encoders and Cherrypickers®, to a common GigE IP backbone or transport network. This simple, stand-alone solution also provides significant power savings to service providers by using 90 percent less power than alternative solutions.

Maps up to 24 MPEG-2 transport streams from ASI to IP
Delivers 931Mbps aggregate bridge bandwidth
Uses less than 20W maximum power draw
Mounts in 1 RU
Provides 24 ASI input ports

Specifications

Product Classification

Regional Availability	Asia \| Australia/New Zealand \| EMEA \| Latin America \| North America
Product Type	Ethernet bridge

General Specifications

Aggregate Bridge Bandwidth	931 Mb/s
Aggregate Ethernet Payload Output	931 Mb/s
ASI Input Ports, quantity	24
Coax Cable Length	304.8 m \| 1000 ft
Data MTS bit-rate	192 kb/s to 213.73 Mb/s
Input Impedance	75 ohm
Latency	100 μs
Video/Audio MTS Bit-rate Range	192 kb/s to 213.73 Mb/s

Dimensions

Width	482.6 mm \| 19 in
Depth	323.85 mm \| 12.75 in

Electrical Specifications

Power Consumption, maximum	20 W
Power Supply, ac	90–264 V

Environmental Specifications

Operating Temperature	0 °C to +50 °C (+32 °F to +122 °F)
Storage Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Operating Humidity	5%–95%
Operating Altitude	–200 feet to 10,000 feet AMSL
Standards Compliance	C-Tick Mark \| CB Scheme Certificate \| CISPR 22 Class A Emissions \| Class A Emissions \| EN 55022:2006/A1 \| EN 60950-1 (Second Edition) \| EN55024 (Immunity) \| FCC Part 15 Class A \| ICES-003 Class A \| IEC 60950-1 Second Edition \| UL Listed to UL 60950-1 Second Edition \| UL-AR / S-Mark

Packaging and Weights

Weight, with mounting hardware

2.722 kg | 6 lb

Product Classification

Regional Availability	Asia \| Australia/New Zealand \| EMEA \| Latin America \| North America
Product Type	Ethernet bridge

General Specifications

Aggregate Bridge Bandwidth	931 Mb/s
Aggregate Ethernet Payload Output	931 Mb/s
ASI Input Ports, quantity	24
Coax Cable Length	304.8 m \| 1000 ft
Data MTS bit-rate	192 kb/s to 213.73 Mb/s
Input Impedance	75 ohm
Latency	100 μs
Video/Audio MTS Bit-rate Range	192 kb/s to 213.73 Mb/s

Dimensions

Width	482.6 mm \| 19 in
Depth	323.85 mm \| 12.75 in

Electrical Specifications

Power Consumption, maximum	20 W
Power Supply, ac	90–264 V

Environmental Specifications

Operating Temperature	0 °C to +50 °C (+32 °F to +122 °F)
Storage Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Operating Humidity	5%–95%
Operating Altitude	–200 feet to 10,000 feet AMSL
Standards Compliance	C-Tick Mark \| CB Scheme Certificate \| CISPR 22 Class A Emissions \| Class A Emissions \| EN 55022:2006/A1 \| EN 60950-1 (Second Edition) \| EN55024 (Immunity) \| FCC Part 15 Class A \| ICES-003 Class A \| IEC 60950-1 Second Edition \| UL Listed to UL 60950-1 Second Edition \| UL-AR / S-Mark