1. ホーム
  2. ネットワークタイプ
  3. ビデオ処理と配信
  4. ケーブル向けビデオヘッドエンドシステム
  5. セットトップ用通信システム
  6. ARPD-1000 | ARPD 1000 小型復調器
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

ARPD-1000 | ARPD 1000 Compact Demodulator

  • Available in:
  • Asia
  • Australia/New Zealand
  • EMEA
  • Latin America
  • North America

High density, modular compact return path demodulator for DCX set-tops

Contact Us for a Quote
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
The ARPD 1000 is a modular, one Rack Unit (RU) high product that supports the inclusion of up to six removable (hot- swappable) demodulator boards (DM boards). The ARPD 1000 performs the same functions as the RPD-1000/2000 products. When compared to the RPD-1000/2000 products the ARPD 1000 has a larger number of upstream demodulators in a smaller physical package and also allows more upstream demodulators to be placed in each upstream path thus saving rack space.

The increased bandwidth capacity of each return path allows the system to support future set-top applications that require large amounts of data in the upstream direction.

The ARPD 1000 is a burst demodulator. At the input, the ARPD1000 receives up to six different electrical RF inputs. Each RF input contains DQPSK modulated MAC cells, transmitted upstream by set-tops out in the cable plant. A demodulator within a DM board in the ARPD1000 chassis performs de-randomization and error correction (FEC).

The output of the ARPD 1000 is UDP/IP/Ethernet carrying an RPD frame as the UDP payload. The ARPD 1000 sends the RPD frame to the destination IP address configured by the operator using the configured destination UDP port number.
  • High-density compact design— 1 RU chassis holds up to six ADM-4000 Advanced Demodulator Modules* and can be functionally equivalent to three RPD-2000s, saving rack space
  • Each ADM-4000 module includes two RF ports (input and output) and supports the ability to demodulate up to three different return channels
  • A fully loaded ARPD chassis containing six ADM-4000 modules supports up to six different upstream paths and the ability to demodulate up to 18 different return channels
  • The ADM-4000 demodulator modules are front-loading (cables connect in the back) and hot-swappable
  • Tuner frequency range is from 5 to 65 MHz, and the dynamic range is 20 dB (0 dBmV ±10 dB)
  • Receives and demodulates upstream data packets (MAC cells) transmitted by STBs and performs FEC, marking each received cell as perfect, corrected, or uncorrectable
  • Performs power level measurement on each demodulated MAC cell to support the STB power levelling system
  • Transmits the demodulated MAC cells containing interactive data and/or polling data to the NC-1500 or RADD over UDP/IP/Ethernet
  • Provides status and alarms using SNMP traps

Product Classification

Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
Product Type Demodulator

General Specifications

Ambient Temperature -0 °C to +50 °C (32 °F to +122 °F)
Ambient Humidity 5%–95%
Fans, quantity 2
Input Frequency Range 5 – 65 MHz
Network Interface 1 RJ45 (10/100Base-T), data output (transmit data to Motorola NC-1500 or RADD, BOOTP and DHCP, diagnostics)
Network Interface 2 1 RJ45 (10/100Base-T)
Rack Units 1
RF Channel Bit Rate 256 kb/s
RF Inputs, quantity 6
RF Interface Type ‘F’ type connector
RF Demodulation DQPSK
RF Demodulation Center Frequencies 5.216 MHz to 64.736 MHz in 192 kHz steps
RF Dynamic Range 20 dB (0 dBmV ±10 dB)
RF Interface and Noise C/(N+I) < 16.5 dB
RF Information Bit Rate 223 kb/s
RF Outputs, quantity 6
RF Symbol Rate 128 ksym/s
RF Return Loss >16.5 dB
RS-232 Console Port Serial RS-232 DB9 Female

Dimensions

Height 43.688 mm | 1.72 in
Width 479.044 mm | 18.86 in
Length 377.19 mm | 14.85 in

Electrical Specifications

Current, ac 1.2 A @ 120 V
Current, dc 1.75 A @ -48 Vdc
Frequency, ac 50 - 60 Hz
Input Voltage, ac 100 - 240 V
Input Voltage, dc –40 to –60 Vdc
Power Consumption, ac, maximum 60 W
Power Consumption, ac, typical 50 W
Power Consumption, maximum 60 W
Power Consumption, typical 50 W W

Packaging and Weights

Weight, gross 3.742 kg | 8.25 lb

Product Classification

Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
Product Type Demodulator

General Specifications

Ambient Temperature -0 °C to +50 °C (32 °F to +122 °F)
Ambient Humidity 5%–95%
Fans, quantity 2
Input Frequency Range 5 – 65 MHz
Network Interface 1 RJ45 (10/100Base-T), data output (transmit data to Motorola NC-1500 or RADD, BOOTP and DHCP, diagnostics)
Network Interface 2 1 RJ45 (10/100Base-T)
Rack Units 1
RF Channel Bit Rate 256 kb/s
RF Inputs, quantity 6
RF Interface Type ‘F’ type connector
RF Demodulation DQPSK
RF Demodulation Center Frequencies 5.216 MHz to 64.736 MHz in 192 kHz steps
RF Dynamic Range 20 dB (0 dBmV ±10 dB)
RF Interface and Noise C/(N+I) < 16.5 dB
RF Information Bit Rate 223 kb/s
RF Outputs, quantity 6
RF Symbol Rate 128 ksym/s
RF Return Loss >16.5 dB
RS-232 Console Port Serial RS-232 DB9 Female

Dimensions

Height 43.688 mm | 1.72 in
Width 479.044 mm | 18.86 in
Length 377.19 mm | 14.85 in

Electrical Specifications

Current, ac 1.2 A @ 120 V
Current, dc 1.75 A @ -48 Vdc
Frequency, ac 50 - 60 Hz
Input Voltage, ac 100 - 240 V
Input Voltage, dc –40 to –60 Vdc
Power Consumption, ac, maximum 60 W
Power Consumption, ac, typical 50 W
Power Consumption, maximum 60 W
Power Consumption, typical 50 W W

Packaging and Weights

Weight, gross 3.742 kg | 8.25 lb