DB654DG65A-C
2-port sector antenna, 2x 410–512 MHz, 65° HPBW, fixed electrical tilt
Features and Benefits
- Air dielectric feed system with no screws, rivets, solder, or welding in dipole feed point
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ABS, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Rear |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 2 |
Dimensions
| Width | 483 mm | 19.016 in |
| Depth | 229 mm | 9.016 in |
| Length | 1981 mm | 77.992 in |
| Net Weight, without mounting kit | 19 kg | 41.888 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 410 – 512 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 410–512 |
| Gain, dBi | 15.0 |
| Beamwidth, Horizontal, degrees | 65 |
| Beamwidth, Vertical, degrees | 17 |
| Beam Tilt, degrees | 0 |
| USLS, typical, dB | 15 |
| Front-to-Back Ratio at 180°, dB | 28 |
| Isolation, Cross Polarization, dB | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 |
| Input Power per Port, maximum, watts | 600 |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 1,397.6 N @ 150 km/h (314.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 201 km/h (125 mph) |
Regulatory Compliance/Certifications
| Agency | Classification |
CE
|
Compliant with the relevant CE product directives |
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | ABS, UV resistant |
| Radiator Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Rear |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 2 |
Dimensions
| Width | 483 mm | 19.016 in |
| Depth | 229 mm | 9.016 in |
| Length | 1981 mm | 77.992 in |
| Net Weight, without mounting kit | 19 kg | 41.888 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 410 – 512 MHz |
| Polarization | ±45° |
Electrical Specifications
| Frequency Band, MHz | 410–512 |
| Gain, dBi | 15.0 |
| Beamwidth, Horizontal, degrees | 65 |
| Beamwidth, Vertical, degrees | 17 |
| Beam Tilt, degrees | 0 |
| USLS, typical, dB | 15 |
| Front-to-Back Ratio at 180°, dB | 28 |
| Isolation, Cross Polarization, dB | 30 |
| VSWR | Return loss, dB | 1.4 | 15.6 |
| Input Power per Port, maximum, watts | 600 |
Mechanical Specifications
| Wind Loading @ Velocity, maximum | 1,397.6 N @ 150 km/h (314.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 201 km/h (125 mph) |
Regulatory Compliance/Certifications
| Agency | Classification |
|
CE
|
Compliant with the relevant CE product directives |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Installation Instruction
Product Information
Product Specification
Warranty
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Other Ways to Browse
