Warning Icon
This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

0 Replacement products available

V4-65D-R4

8-port sector antenna, 8x 1710–2690 MHz, 65° HPBW, 4x RET with manual override.

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 180 mm | 7.087 in
Length 2675 mm | 105.315 in
Net Weight, without mounting kit 29.5 kg | 65.036 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1710–1880 1920–2200 2300–2500 2500–2690
Gain, dBi 16.9 17.8 18.3 18.9
Beamwidth, Horizontal, degrees 70 67 60 54
Beamwidth, Vertical, degrees 6.9 6.3 5.5 5.2
Beam Tilt, degrees 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 16 17 20 20
Front-to-Back Ratio at 180°, dB 35 37 40 39
Isolation, Cross Polarization, dB 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 16.8 17.4 18.1 18.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.4 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 16.6
5 ° | 16.8
10 ° | 16.8
0 ° | 17.3
5 ° | 17.5
10 ° | 17.3
0 ° | 17.8
5 ° | 18.1
10 ° | 18.1
0 ° | 18.4
5 ° | 18.7
10 ° | 18.2
Beamwidth, Horizontal Tolerance, degrees ±2.7 ±3 ±4.1 ±2.8
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.6 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 15 18 18
Front-to-Back Total Power at 180° ± 30°, dB 25 27 28 27
CPR at Boresight, dB 15 16 16 15
CPR at Sector, dB 12 12 6 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 439.0 N @ 150 km/h (98.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 372.0 N @ 150 km/h (83.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 845.0 N @ 150 km/h (190.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 445.0 N @ 150 km/h (100.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 309 mm | 12.165 in
Length, packed 2924 mm | 115.118 in
Weight, gross 48 kg | 105.822 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 180 mm | 7.087 in
Length 2675 mm | 105.315 in
Net Weight, without mounting kit 29.5 kg | 65.036 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1710–1880 1920–2200 2300–2500 2500–2690
Gain, dBi 16.9 17.8 18.3 18.9
Beamwidth, Horizontal, degrees 70 67 60 54
Beamwidth, Vertical, degrees 6.9 6.3 5.5 5.2
Beam Tilt, degrees 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 16 17 20 20
Front-to-Back Ratio at 180°, dB 35 37 40 39
Isolation, Cross Polarization, dB 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 16.8 17.4 18.1 18.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.4 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 16.6; 5 ° | 16.8; 10 ° | 16.8 0 ° | 17.3; 5 ° | 17.5; 10 ° | 17.3 0 ° | 17.8; 5 ° | 18.1; 10 ° | 18.1 0 ° | 18.4; 5 ° | 18.7; 10 ° | 18.2
Beamwidth, Horizontal Tolerance, degrees ±2.7 ±3 ±4.1 ±2.8
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.6 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 15 18 18
Front-to-Back Total Power at 180° ± 30°, dB 25 27 28 27
CPR at Boresight, dB 15 16 16 15
CPR at Sector, dB 12 12 6 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 439.0 N @ 150 km/h (98.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 372.0 N @ 150 km/h (83.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 845.0 N @ 150 km/h (190.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 445.0 N @ 150 km/h (100.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 309 mm | 12.165 in
Length, packed 2924 mm | 115.118 in
Weight, gross 48 kg | 105.822 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification