Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

S4-90M-R1-V2

8-port Planar Array Antenna, 3300–3800 MHz, 90° HPBW, 1x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Planar array antenna – 4 columns
  • Single internal RET control for all four antenna arrays
  • Designed for beamforming, includes calibration port
  • Optimized for software defined split six sector applications
  • Fits in the CommScope AEKT solution

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC
Radiator Material Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 850 mm | 33.465 in
Net Weight, without mounting kit 8.64 kg | 19.048 lb
TDD Column Spacing 42 mm | 1.654 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 15.5 16.0
Beamwidth, Horizontal, degrees 96 86
Beamwidth, Vertical, degrees 6.7 6.3
Beam Tilt, degrees 2–12 2–12
Beam Tilt Tolerance, degrees ±0.5 ±0.5
USLS (First Lobe), dB 20 19
Front-to-Back Ratio at 180°, dB 29 29
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Inter-band, dB 19 19
Isolation, Cross Polarization, port to port, dB 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -140 -140
Input Power per Port at 50°C, maximum, watts 50 50

Electrical Specifications, BASTA

Frequency Band, MHz 3300–3600 3600–3800
Gain by all Beam Tilts, average, dBi 14.9 15.4
Gain by all Beam Tilts Tolerance, dB ±0.9 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 14.5
7 ° | 14.9
12 ° | 14.9
2 ° | 15.1
7 ° | 15.4
12 ° | 15.3
Beamwidth, Horizontal Tolerance, degrees ±13.1 ±10.6
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 15
Front-to-Back Total Power at 180° ± 30°, dB 21 22
CPR at Boresight, dB 17 16
CPR at Sector, dB 12 10

Electrical Specifications, Broadcast 65

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 16.4 16.4
Beamwidth, Horizontal, degrees 66 65
Beamwidth, Horizontal Tolerance, degrees ±4.0 ±4.0
Beamwidth, Vertical, degrees 6.7 6.4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3
USLS (First Lobe), dB 20 19

Electrical Specifications, Service Beam

Frequency Band, MHz 3300–3600 3600–3800
Steered 0° Gain, dBi 20.7 21.1
Steered 0° Gain Tolerance, dBi ±0.6 ±0.3
Steered 0° Beamwidth, Horizontal, degrees 25 24
Steered 0° CPR at Beampeak, dB 19 16
Steered 0° Horizontal Sidelobe, dB 12 12
Steered 30° Gain, dBi 19.9 20.1
Steered 30° Gain Tolerance, dBi ±0.5 ±0.5
Steered 30° Beamwidth, Horizontal, degrees 28 26
Steered 30° CPR at Beampeak, dB 19 17
Steered 30° CPR over 10 dB Beamwidth, dB 14 14
Steered 30° Horizontal Sidelobe, dB 9 9

Electrical Specifications, Soft Split

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 19.8 20.2
Beamwidth, Horizontal, degrees 31 29
CPR at Beampeak, dB 18 16
Horizontal Sidelobe, dB 18 18

Mechanical Specifications

Mechanical Tilt Range 0°–24°
Wind Loading @ Velocity, frontal 284.0 N @ 150 km/h (63.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 56.0 N @ 150 km/h (12.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 286.0 N @ 150 km/h (64.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 343.0 N @ 150 km/h (77.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1035 mm | 40.748 in
Weight, gross 19.1 kg | 42.108 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC
Radiator Material Low loss circuit board
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 850 mm | 33.465 in
Net Weight, without mounting kit 8.64 kg | 19.048 lb
TDD Column Spacing 42 mm | 1.654 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3300 – 3800 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 15.5 16.0
Beamwidth, Horizontal, degrees 96 86
Beamwidth, Vertical, degrees 6.7 6.3
Beam Tilt, degrees 2–12 2–12
Beam Tilt Tolerance, degrees ±0.5 ±0.5
USLS (First Lobe), dB 20 19
Front-to-Back Ratio at 180°, dB 29 29
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Inter-band, dB 19 19
Isolation, Cross Polarization, port to port, dB 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -140 -140
Input Power per Port at 50°C, maximum, watts 50 50

Electrical Specifications, BASTA

Frequency Band, MHz 3300–3600 3600–3800
Gain by all Beam Tilts, average, dBi 14.9 15.4
Gain by all Beam Tilts Tolerance, dB ±0.9 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 14.5; 7 ° | 14.9;12 ° | 14.9 2 ° | 15.1; 7 ° | 15.4;12 ° | 15.3
Beamwidth, Horizontal Tolerance, degrees ±13.1 ±10.6
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 15 15
Front-to-Back Total Power at 180° ± 30°, dB 21 22
CPR at Boresight, dB 17 16
CPR at Sector, dB 12 10

Electrical Specifications, Broadcast 65

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 16.4 16.4
Beamwidth, Horizontal, degrees 66 65
Beamwidth, Horizontal Tolerance, degrees ±4.0 ±4.0
Beamwidth, Vertical, degrees 6.7 6.4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3
USLS (First Lobe), dB 20 19

Electrical Specifications, Service Beam

Frequency Band, MHz 3300–3600 3600–3800
Steered 0° Gain, dBi 20.7 21.1
Steered 0° Gain Tolerance, dBi ±0.6 ±0.3
Steered 0° Beamwidth, Horizontal, degrees 25 24
Steered 0° CPR at Beampeak, dB 19 16
Steered 0° Horizontal Sidelobe, dB 12 12
Steered 30° Gain, dBi 19.9 20.1
Steered 30° Gain Tolerance, dBi ±0.5 ±0.5
Steered 30° Beamwidth, Horizontal, degrees 28 26
Steered 30° CPR at Beampeak, dB 19 17
Steered 30° CPR over 10 dB Beamwidth, dB 14 14
Steered 30° Horizontal Sidelobe, dB 9 9

Electrical Specifications, Soft Split

Frequency Band, MHz 3300–3600 3600–3800
Gain, dBi 19.8 20.2
Beamwidth, Horizontal, degrees 31 29
CPR at Beampeak, dB 18 16
Horizontal Sidelobe, dB 18 18

Mechanical Specifications

Mechanical Tilt Range 0°–24°
Wind Loading @ Velocity, frontal 284.0 N @ 150 km/h (63.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 56.0 N @ 150 km/h (12.6 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 286.0 N @ 150 km/h (64.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 343.0 N @ 150 km/h (77.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.26 in
Depth, packed 257 mm | 10.118 in
Length, packed 1035 mm | 40.748 in
Weight, gross 19.1 kg | 42.108 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification