Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RVV2H-6533B-R5

10-port sector antenna, 2x 694–960 and 4x 1695-2690 MHz 65° HPBW and 4x 1710-2400 MHz 2x 33° HPBW, 5x RET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 1996 mm | 78.583 in
Net Weight, without mounting kit 28.2 kg | 62.17 lb

Array Layout

Click on image to enlarge.

Beams Configuration

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

R1 R1 Y1-Y2 Y1-Y2 Y1-Y2 Y3-Y4 Y3-Y4 Y3-Y4
Frequency Band, MHz 694–790 790–960 1695–1920 1920–2180 2300–2690 1710–1880 1920–2180 2300–2400
Gain, dBi 15.0 15.3 16.6 17.0 17.3 16.4 17.8 18.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 68 66 62 63 66 33 31 27
Beamwidth, Vertical, degrees 11.9 10.5 8.9 8 6.6 10.2 9.2 8.3
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 20 18 18 20 20 21 24
Front-to-Back Ratio at 180°, dB 31 32 36 36 30 28 35 35
Isolation, Cross Polarization, dB 28 28 26 26 26 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–960 1695–1920 1920–2180 2300–2690 1710–1880 1920–2180 2300–2400
Gain by all Beam Tilts, average, dBi 14.8 15.1 16.1 16.7 16.8 15.9 17.4 17.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.4 ±0.6 ±0.4 ±0.5 ±0.9 ±0.6 ±1.5
Gain by Beam Tilt, average, dBi 2 ° | 14.8
8 ° | 14.8
14 ° | 14.6
2 ° | 15.2
8 ° | 15.1
14 ° | 14.8
2 ° | 16.1
7 ° | 16.2
12 ° | 16.1
2 ° | 16.5
7 ° | 16.7
12 ° | 16.7
2 ° | 16.6
7 ° | 17.0
12 ° | 16.7
2 ° | 15.9
7 ° | 16.0
12 ° | 15.7
2 ° | 17.2
7 ° | 17.5
12 ° | 17.2
2 ° | 17.5
7 ° | 17.7
12 ° | 16.9
Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.9 ±3.3 ±3.7 ±5 ±1.5 ±1.6 ±0.9
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.8 ±0.7 ±0.6 ±0.5 ±0.5 ±0.5 ±0.3
USLS, beampeak to 20° above beampeak, dB 21 15 16 18 14 20 19 19
Front-to-Back Total Power at 180° ± 30°, dB 25 24 29 26 25 22 28 27
CPR at Boresight, dB 17 17 18 21 16 18 20 15
CPR at Sector, dB 10 9 13 12 7
CPR at 10 dB Horizontal Beamwidth, dB 7 11 7

Mechanical Specifications

Mechanical Tilt Range 0°–12°
Wind Loading @ Velocity, frontal 334.0 N @ 150 km/h (75.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 708.0 N @ 150 km/h (159.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 354.0 N @ 150 km/h (79.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2136 mm | 84.095 in
Weight, gross 42.2 kg | 93.035 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 1996 mm | 78.583 in
Net Weight, without mounting kit 28.2 kg | 62.17 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1710 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

R1 R1 Y1-Y2 Y1-Y2 Y1-Y2 Y3-Y4 Y3-Y4 Y3-Y4
Frequency Band, MHz 694–790 790–960 1695–1920 1920–2180 2300–2690 1710–1880 1920–2180 2300–2400
Gain, dBi 15.0 15.3 16.6 17.0 17.3 16.4 17.8 18.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 68 66 62 63 66 33 31 27
Beamwidth, Vertical, degrees 11.9 10.5 8.9 8 6.6 10.2 9.2 8.3
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 20 18 18 20 20 21 24
Front-to-Back Ratio at 180°, dB 31 32 36 36 30 28 35 35
Isolation, Cross Polarization, dB 28 28 26 26 26 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 300 300 250 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–960 1695–1920 1920–2180 2300–2690 1710–1880 1920–2180 2300–2400
Gain by all Beam Tilts, average, dBi 14.8 15.1 16.1 16.7 16.8 15.9 17.4 17.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.4 ±0.6 ±0.4 ±0.5 ±0.9 ±0.6 ±1.5
Gain by Beam Tilt, average, dBi 2 ° | 14.8; 8 ° | 14.8;14 ° | 14.6 2 ° | 15.2; 8 ° | 15.1;14 ° | 14.8 2 ° | 16.1; 7 ° | 16.2;12 ° | 16.1 2 ° | 16.5; 7 ° | 16.7;12 ° | 16.7 2 ° | 16.6; 7 ° | 17.0;12 ° | 16.7 2 ° | 15.9; 7 ° | 16.0;12 ° | 15.7 2 ° | 17.2; 7 ° | 17.5;12 ° | 17.2 2 ° | 17.5; 7 ° | 17.7;12 ° | 16.9
Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.9 ±3.3 ±3.7 ±5 ±1.5 ±1.6 ±0.9
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.8 ±0.7 ±0.6 ±0.5 ±0.5 ±0.5 ±0.3
USLS, beampeak to 20° above beampeak, dB 21 15 16 18 14 20 19 19
Front-to-Back Total Power at 180° ± 30°, dB 25 24 29 26 25 22 28 27
CPR at Boresight, dB 17 17 18 21 16 18 20 15
CPR at Sector, dB 10 9 13 12 7
CPR at 10 dB Horizontal Beamwidth, dB 7 11 7

Mechanical Specifications

Mechanical Tilt Range 0°–12°
Wind Loading @ Velocity, frontal 334.0 N @ 150 km/h (75.1 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 282.0 N @ 150 km/h (63.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 708.0 N @ 150 km/h (159.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 354.0 N @ 150 km/h (79.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2136 mm | 84.095 in
Weight, gross 42.2 kg | 93.035 lb
Click on image to enlarge.
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Specification

Product Specification