Warning Icon
This product was discontinued on: March 31, 2021

For other alternatives, please contact us for more information.

0 Replacement products available

NH65T-DG-F0

2-port small cell antenna, 2x (698-896 and 1710–2180 MHz), 65° HPBW, fixed electrical tilt, with internal diplexer and active GPS L1 band antenna.

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Small Cell
Band Multiband
Color Light Gray (RAL 7035)
GPS Connector Interface 4.1-9.5 DIN Female
GPS Connector Quantity 1
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Internal GPS frequency band 1575.42 MHz
Internal GPS VSWR 2
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, diplexed low and high bands 2
RF Connector Quantity, total 2

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 389 mm | 15.315 in
Net Weight, without mounting kit 4.7 kg | 10.362 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1710 – 2180 MHz
Polarization ±45°
Total Input Power, maximum 150 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2180
Gain, dBi 7.7 8.2 11.6 11.6 11.5
Beamwidth, Horizontal, degrees 75 66 53 55 55
Beamwidth, Vertical, degrees 73.7 66.9 32.5 31 29
Beam Tilt, degrees 5 5 0 0 0
Front-to-Back Ratio at 180°, dB 20 20 34 36 30
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 75 75 75 75 75

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 7.3 7.9 11.5 11.5 11.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.7 ±0.3 ±0.3 ±0.3
Beamwidth, Horizontal Tolerance, degrees ±5.9 ±9.3 ±1.9 ±1.8 ±2.5
Beamwidth, Vertical Tolerance, degrees ±6.6 ±8 ±1 ±1.3 ±2.8
Front-to-Back Total Power at 180° ± 30°, dB 15 14 27 27 23

Mechanical Specifications

Wind Loading @ Velocity, frontal 52.0 N @ 150 km/h (11.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 39.0 N @ 150 km/h (8.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 101.0 N @ 150 km/h (22.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 53.0 N @ 150 km/h (11.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 576 mm | 22.677 in
Weight, gross 8.7 kg | 19.18 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Small Cell
Band Multiband
Color Light Gray (RAL 7035)
GPS Connector Interface 4.1-9.5 DIN Female
GPS Connector Quantity 1
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Internal GPS frequency band 1575.42 MHz
Internal GPS VSWR 2
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, diplexed low and high bands 2
RF Connector Quantity, total 2

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 389 mm | 15.315 in
Net Weight, without mounting kit 4.7 kg | 10.362 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1710 – 2180 MHz
Polarization ±45°
Total Input Power, maximum 150 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2180
Gain, dBi 7.7 8.2 11.6 11.6 11.5
Beamwidth, Horizontal, degrees 75 66 53 55 55
Beamwidth, Vertical, degrees 73.7 66.9 32.5 31 29
Beam Tilt, degrees 5 5 0 0 0
Front-to-Back Ratio at 180°, dB 20 20 34 36 30
Isolation, Cross Polarization, dB 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 75 75 75 75 75

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 7.3 7.9 11.5 11.5 11.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.7 ±0.3 ±0.3 ±0.3
Beamwidth, Horizontal Tolerance, degrees ±5.9 ±9.3 ±1.9 ±1.8 ±2.5
Beamwidth, Vertical Tolerance, degrees ±6.6 ±8 ±1 ±1.3 ±2.8
Front-to-Back Total Power at 180° ± 30°, dB 15 14 27 27 23

Mechanical Specifications

Wind Loading @ Velocity, frontal 52.0 N @ 150 km/h (11.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 39.0 N @ 150 km/h (8.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 101.0 N @ 150 km/h (22.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 53.0 N @ 150 km/h (11.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 576 mm | 22.677 in
Weight, gross 8.7 kg | 19.18 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Product Specification

Product Specification