Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

HBXX-3319DS-VTM | HBXX-3319DS-A2M

4-port sector antenna, 4x 1710–2180 MHz, 33° HPBW, RET compatible
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 20.3 20.3 20.7
Beamwidth, Horizontal, degrees 36 35 34
Beamwidth, Vertical, degrees 6.5 6.2 5.9
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 15 16 16
Front-to-Back Ratio at 180°, dB 41 42 42
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 28 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 20.0 20.0 20.3
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.8
Gain by Beam Tilt, average, dBi 10 ° | 19.7
5 ° | 20.1
0 ° | 20.1
10 ° | 19.7
5 ° | 20.1
0 ° | 20.0
10 ° | 19.9
5 ° | 20.5
0 ° | 20.4
Beamwidth, Horizontal Tolerance, degrees ±2.8 ±1.6 ±2.4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 14 15 15
Front-to-Back Total Power at 180° ± 30°, dB 36 38 37
CPR at Boresight, dB 25 24 24

General Specifications

Antenna Type Sector
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information, General

Model with Factory Installed AISG 2.0 Actuator HBXX-3319DS-A2M

Dimensions

Width 564 mm | 22.205 in
Length 1448 mm | 57.008 in
Depth 125 mm | 4.921 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant

Mechanical Specifications

Wind Loading at Velocity, frontal 229.1 lbf @ 150 km/h | 1,019.0 N @ 150 km/h
Wind Loading at Velocity, lateral 39.6 lbf @ 150 km/h | 176.0 N @ 150 km/h
Wind Speed, maximum 201 km/h | 124.896 mph

Packaging and Weights

Width, packed 758 mm | 29.843 in
Depth, packed 281 mm | 11.063 in
Length, packed 1934 mm | 76.142 in
Net Weight, without mounting kit 17.3 kg | 38.14 lb
Weight, gross 30.8 kg | 67.902 lb

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 20.3 20.3 20.7
Beamwidth, Horizontal, degrees 36 35 34
Beamwidth, Vertical, degrees 6.5 6.2 5.9
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 15 16 16
Front-to-Back Ratio at 180°, dB 41 42 42
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 28 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 20.0 20.0 20.3
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.8
Gain by Beam Tilt, average, dBi 10 ° | 19.7; 5 ° | 20.1;0 ° | 20.1 10 ° | 19.7; 5 ° | 20.1;0 ° | 20.0 10 ° | 19.9; 5 ° | 20.5;0 ° | 20.4
Beamwidth, Horizontal Tolerance, degrees ±2.8 ±1.6 ±2.4
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 14 15 15
Front-to-Back Total Power at 180° ± 30°, dB 36 38 37
CPR at Boresight, dB 25 24 24

General Specifications

Antenna Type Sector
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information, General

Model with Factory Installed AISG 2.0 Actuator HBXX-3319DS-A2M

Dimensions

Width 564 mm | 22.205 in
Length 1448 mm | 57.008 in
Depth 125 mm | 4.921 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant

Mechanical Specifications

Wind Loading at Velocity, frontal 229.1 lbf @ 150 km/h | 1,019.0 N @ 150 km/h
Wind Loading at Velocity, lateral 39.6 lbf @ 150 km/h | 176.0 N @ 150 km/h
Wind Speed, maximum 201 km/h | 124.896 mph

Packaging and Weights

Width, packed 758 mm | 29.843 in
Depth, packed 281 mm | 11.063 in
Length, packed 1934 mm | 76.142 in
Net Weight, without mounting kit 17.3 kg | 38.14 lb
Weight, gross 30.8 kg | 67.902 lb

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance
Other Ways to Browse