Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

HBX-9016DS-VTM | HBX-9016DS-A1M

2-port sector antenna, 2x 1710–2180 MHz, 90° HPBW, RET compatible
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Excellent gain, USLS, VSWR, and PIM specification to improve network quality
  • Ideal solution to maximize coverage and capacity in suburban and rural areas
  • Fully compatible with Andrew remote electrical tilt system for greater OpEx savings
  • Wide horizontal and narrow vertical beamwidth to maximize coverage and capacity
Specifications

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 17.7 17.7 18.0
Beamwidth, Horizontal, degrees 85 86 87
Beamwidth, Vertical, degrees 5.1 4.7 4.4
Beam Tilt, degrees 0–6 0–6 0–6
USLS (First Lobe), dB 18 18 18
Front-to-Back Ratio at 180°, dB 28 28 27
CPR at Boresight, dB 21 24 20
CPR at Sector, dB 14 13 11
Isolation, Cross Polarization, dB 30 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -155 -155 -155
Input Power per Port, maximum, watts 350 350 350

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 17.5 17.4 17.6
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.2 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 17.4
3 ° | 17.6
6 ° | 17.4
0 ° | 17.4
3 ° | 17.5
6 ° | 17.3
0 ° | 17.5
3 ° | 17.7
6 ° | 17.4
Beamwidth, Horizontal Tolerance, degrees ±1.4 ±1.5 ±1.5
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.3
USLS, beampeak to 20° above beampeak, dB 18 18 19
Front-to-Back Total Power at 180° ± 30°, dB 24 23 21
CPR at Boresight, dB 24 26 23
CPR at Sector, dB 14 13 11

General Specifications

Antenna Type Sector
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information, General

Model with Factory Installed AISG 2.0 Actuator HBX-9016DS-A1M

Dimensions

Width 172 mm | 6.772 in
Length 1897 mm | 74.685 in
Depth 97 mm | 3.819 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant

Mechanical Specifications

Wind Loading at Velocity, frontal 68.8 lbf @ 150 km/h | 302.0 N @ 150 km/h
Wind Loading at Velocity, lateral 140.0 N @ 150 km/h | 31.5 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 283 mm | 11.142 in
Depth, packed 200 mm | 7.874 in
Length, packed 2206 mm | 86.85 in
Net Weight, without mounting kit 7.6 kg | 16.755 lb
Weight, gross 16.6 kg | 36.597 lb

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 17.7 17.7 18.0
Beamwidth, Horizontal, degrees 85 86 87
Beamwidth, Vertical, degrees 5.1 4.7 4.4
Beam Tilt, degrees 0–6 0–6 0–6
USLS (First Lobe), dB 18 18 18
Front-to-Back Ratio at 180°, dB 28 28 27
CPR at Boresight, dB 21 24 20
CPR at Sector, dB 14 13 11
Isolation, Cross Polarization, dB 30 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -155 -155 -155
Input Power per Port, maximum, watts 350 350 350

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 17.5 17.4 17.6
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.2 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 17.4; 3 ° | 17.6; 6 ° | 17.4 0 ° | 17.4; 3 ° | 17.5; 6 ° | 17.3 0 ° | 17.5; 3 ° | 17.7; 6 ° | 17.4
Beamwidth, Horizontal Tolerance, degrees ±1.4 ±1.5 ±1.5
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.3
USLS, beampeak to 20° above beampeak, dB 18 18 19
Front-to-Back Total Power at 180° ± 30°, dB 24 23 21
CPR at Boresight, dB 24 26 23
CPR at Sector, dB 14 13 11

General Specifications

Antenna Type Sector
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information, General

Model with Factory Installed AISG 2.0 Actuator HBX-9016DS-A1M

Dimensions

Width 172 mm | 6.772 in
Length 1897 mm | 74.685 in
Depth 97 mm | 3.819 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant

Mechanical Specifications

Wind Loading at Velocity, frontal 68.8 lbf @ 150 km/h | 302.0 N @ 150 km/h
Wind Loading at Velocity, lateral 140.0 N @ 150 km/h | 31.5 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 283 mm | 11.142 in
Depth, packed 200 mm | 7.874 in
Length, packed 2206 mm | 86.85 in
Net Weight, without mounting kit 7.6 kg | 16.755 lb
Weight, gross 16.6 kg | 36.597 lb

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant
CHINA-ROHS CHINA-ROHSBelow maximum concentration value
REACH-SVHC REACH-SVHCCompliant as per SVHC revision on www.commscope.com/ProductCompliance
Other Ways to Browse