Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

FVV-65C-R3

6-port sector antenna, 2x 617-894 and 4x 1695–2690 MHz, 65° HPBW, 3x RET, 600 MHz-Ready Antenna Technology
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

General Specifications

Antenna Type Sector
Band Multiband
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Width 301 mm | 11.85 in
Length 2451 mm | 96.496 in
Depth 181 mm | 7.126 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 15.4 15.8 17.5 18.1 18.6 19.1 19.2
Beamwidth, Horizontal, degrees 71 69 66 66 65 61 57
Beamwidth, Vertical, degrees 10.3 8.7 5.6 5.3 4.9 4.4 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 23 20 16 17 17 18 20
Front-to-Back Ratio at 180°, dB 26 28 37 35 32 28 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.2 15.5 17.0 17.6 18.1 18.7 18.8
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.7 ±0.6 ±0.6 ±0.5 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 14.9
7 ° | 15.2
12 ° | 15.2
2 ° | 15.1
7 ° | 15.6
12 ° | 15.4
2 ° | 16.9
7 ° | 17.1
12 ° | 16.9
2 ° | 17.3
7 ° | 17.7
12 ° | 17.7
2 ° | 17.7
7 ° | 18.1
12 ° | 18.1
2 ° | 18.5
7 ° | 18.8
12 ° | 18.4
2 ° | 18.5
7 ° | 19.0
12 ° | 18.7
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±2.9 ±4.1 ±3.7 ±3.6 ±7.4 ±7.3
Beamwidth, Vertical Tolerance, degrees ±0.6 ±1.1 ±0.4 ±0.2 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 21 15 15 16 16 17 13
Front-to-Back Total Power at 180° ± 30°, dB 22 23 24 25 25 24 25
CPR at Boresight, dB 17 16 16 16 17 17 16
CPR at Sector, dB 10 11 7 7 7 6 4

Mechanical Specifications

Wind Loading at Velocity, frontal 396.0 N @ 150 km/h | 89.0 lbf @ 150 km/h
Wind Loading at Velocity, lateral 332.0 N @ 150 km/h | 74.6 lbf @ 150 km/h
Wind Loading at Velocity, maximum 171.1 lbf @ 150 km/h | 761.0 N @ 150 km/h
Wind Loading at Velocity, rear 401.0 N @ 150 km/h | 90.1 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 2561 mm | 100.827 in
Net Weight, without mounting kit 24.4 kg | 53.793 lb
Weight, gross 36.5 kg | 80.469 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value

General Specifications

Antenna Type Sector
Band Multiband
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Width 301 mm | 11.85 in
Length 2451 mm | 96.496 in
Depth 181 mm | 7.126 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 15.4 15.8 17.5 18.1 18.6 19.1 19.2
Beamwidth, Horizontal, degrees 71 69 66 66 65 61 57
Beamwidth, Vertical, degrees 10.3 8.7 5.6 5.3 4.9 4.4 4.1
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 23 20 16 17 17 18 20
Front-to-Back Ratio at 180°, dB 26 28 37 35 32 28 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.2 15.5 17.0 17.6 18.1 18.7 18.8
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.5 ±0.7 ±0.6 ±0.6 ±0.5 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 14.9; 7 ° | 15.2;12 ° | 15.2 2 ° | 15.1; 7 ° | 15.6;12 ° | 15.4 2 ° | 16.9; 7 ° | 17.1;12 ° | 16.9 2 ° | 17.3; 7 ° | 17.7;12 ° | 17.7 2 ° | 17.7; 7 ° | 18.1;12 ° | 18.1 2 ° | 18.5; 7 ° | 18.8;12 ° | 18.4 2 ° | 18.5; 7 ° | 19.0;12 ° | 18.7
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±2.9 ±4.1 ±3.7 ±3.6 ±7.4 ±7.3
Beamwidth, Vertical Tolerance, degrees ±0.6 ±1.1 ±0.4 ±0.2 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 21 15 15 16 16 17 13
Front-to-Back Total Power at 180° ± 30°, dB 22 23 24 25 25 24 25
CPR at Boresight, dB 17 16 16 16 17 17 16
CPR at Sector, dB 10 11 7 7 7 6 4

Mechanical Specifications

Wind Loading at Velocity, frontal 396.0 N @ 150 km/h | 89.0 lbf @ 150 km/h
Wind Loading at Velocity, lateral 332.0 N @ 150 km/h | 74.6 lbf @ 150 km/h
Wind Loading at Velocity, maximum 171.1 lbf @ 150 km/h | 761.0 N @ 150 km/h
Wind Loading at Velocity, rear 401.0 N @ 150 km/h | 90.1 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 2561 mm | 100.827 in
Net Weight, without mounting kit 24.4 kg | 53.793 lb
Weight, gross 36.5 kg | 80.469 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
Other Ways to Browse

Browse by Application

Browse by Application