Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

FHH-65C-R3

6-port sector antenna, 2x 617-806 and 4x 1695–2360 MHz, 65° HPBW, 3x RET, 600 MHz-Ready Antenna Technology
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Specifications

Electrical Specifications

Frequency Band, MHz 617–698 698–806 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 15.8 16.3 18.1 18.6 18.7 19.2
Beamwidth, Horizontal, degrees 66 61 58 61 64 62
Beamwidth, Vertical, degrees 10.4 9.3 5.6 5.2 4.9 4.4
Beam Tilt, degrees 2–13 2–13 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 17 20 18 19 21
Front-to-Back Ratio at 180°, dB 31 29 35 35 35 35
Isolation, Cross Polarization, dB 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–806 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 15.6 16.1 17.8 18.2 18.4 18.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.5 ±0.5 ±0.4 ±0.4
Gain by Beam Tilt, average, dBi 13 ° | 15.6
2 ° | 15.5
7 ° | 15.8
13 ° | 15.9
2 ° | 15.9
7 ° | 16.2
12 ° | 17.7
2 ° | 17.7
7 ° | 17.9
12 ° | 18.2
2 ° | 17.9
7 ° | 18.3
12 ° | 18.4
2 ° | 18.1
7 ° | 18.6
12 ° | 18.8
2 ° | 18.4
7 ° | 19.0
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±4.2 ±4.6 ±6.2 ±6 ±5.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7 ±0.3 ±0.3 ±0.4 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 14 15 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 25 23 27 28 28 28
CPR at Boresight, dB 23 25 17 20 19 23
CPR at Sector, dB 11 9 8 10 6 9

General Specifications

Antenna Type Sector
Band Multiband
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 male | 1 female

Dimensions

Width 395 mm | 15.551 in
Length 2438 mm | 95.984 in
Depth 228 mm | 8.976 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2360 MHz | 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET Low band (1) | High band (2)

Material Specifications

Radiator Material Low loss circuit board | Aluminum
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 510.0 N @ 150 km/h | 115.1 lbf @ 150 km/h
Wind Loading at Velocity, lateral 374.0 N @ 150 km/h | 84.1 lbf @ 150 km/h
Wind Loading at Velocity, maximum 196.0 lbf @ 150 km/h | 872.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 514 mm | 20.236 in
Depth, packed 372 mm | 14.646 in
Length, packed 2645 mm | 104.134 in
Net Weight, without mounting kit 31.5 kg | 69.446 lb
Weight, gross 48.1 kg | 106.042 lb

Array Layout

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system

Electrical Specifications

Frequency Band, MHz 617–698 698–806 1695–1880 1850–1990 1920–2200 2300–2360
Gain, dBi 15.8 16.3 18.1 18.6 18.7 19.2
Beamwidth, Horizontal, degrees 66 61 58 61 64 62
Beamwidth, Vertical, degrees 10.4 9.3 5.6 5.2 4.9 4.4
Beam Tilt, degrees 2–13 2–13 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 21 17 20 18 19 21
Front-to-Back Ratio at 180°, dB 31 29 35 35 35 35
Isolation, Cross Polarization, dB 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 250 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–806 1695–1880 1850–1990 1920–2200 2300–2360
Gain by all Beam Tilts, average, dBi 15.6 16.1 17.8 18.2 18.4 18.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.3 ±0.5 ±0.5 ±0.4 ±0.4
Gain by Beam Tilt, average, dBi 13 ° | 15.6; 2 ° | 15.5; 7 ° | 15.8 13 ° | 15.9; 2 ° | 15.9; 7 ° | 16.2 12 ° | 17.7; 2 ° | 17.7; 7 ° | 17.9 12 ° | 18.2; 2 ° | 17.9; 7 ° | 18.3 12 ° | 18.4; 2 ° | 18.1; 7 ° | 18.6 12 ° | 18.8; 2 ° | 18.4; 7 ° | 19.0
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±4.2 ±4.6 ±6.2 ±6 ±5.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7 ±0.3 ±0.3 ±0.4 ±0.2
USLS, beampeak to 20° above beampeak, dB 18 14 15 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 25 23 27 28 28 28
CPR at Boresight, dB 23 25 17 20 19 23
CPR at Sector, dB 11 9 8 10 6 9

General Specifications

Antenna Type Sector
Band Multiband
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 male | 1 female

Dimensions

Width 395 mm | 15.551 in
Length 2438 mm | 95.984 in
Depth 228 mm | 8.976 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2360 MHz | 617 – 806 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET Low band (1) | High band (2)

Material Specifications

Radiator Material Low loss circuit board | Aluminum
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 510.0 N @ 150 km/h | 115.1 lbf @ 150 km/h
Wind Loading at Velocity, lateral 374.0 N @ 150 km/h | 84.1 lbf @ 150 km/h
Wind Loading at Velocity, maximum 196.0 lbf @ 150 km/h | 872.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 514 mm | 20.236 in
Depth, packed 372 mm | 14.646 in
Length, packed 2645 mm | 104.134 in
Net Weight, without mounting kit 31.5 kg | 69.446 lb
Weight, gross 48.1 kg | 106.042 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
Documentation & Downloads

Assembly Drawing

Environment Health and Safety

Installation Instruction

Product Information

Product Specification

Warranty

Other Ways to Browse

Browse by Application

Browse by Application