Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

EGYHHTT-65A-R6

14-port, 1.5m, multiband antenna, RF port assignments are as follows: R1 = 694–862, R2 = 880–960, G1 = 1427-1518, B1 & B2 = 1695–2180 and Y1 & Y2 = 2490-2690 MHz, 65° HPBW, 6x RET. Y1 & Y2 share a common RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Electrical tilt settings applicable to RF Ports R1, R2, G1, B1 & B2 can be set independently (See Array Layout and RET Table below)
  • A common electrical tilt setting is shared by RF Ports Y1 & Y2
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 10
RF Connector Quantity, low band 4
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 1499 mm | 59.016 in
Net Weight, antenna only 28.8 kg | 63.493 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 880 – 960 MHz | 1427 – 1518 MHz | 1695 – 2180 MHz | 2490 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–862 880–960 1427–1518 1695–1995 1695–1995 1920–2180 1920–2180 2490–2690 2490–2690
Gain by all Beam Tilts, average, dBi 13.8 14.0 14.2 15.6 16.7 16.2 16.8 16.4 16.5 15.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.4 ±0.2 ±0.5 ±0.5 ±0.3 ±0.4 ±0.6 ±0.6
Beamwidth, Horizontal Tolerance, degrees ±2 ±2 ±2 ±3 ±3 ±3 ±2 ±2 ±7 ±5
Beamwidth, Vertical Tolerance, degrees ±1.6 ±0.8 ±0.9 ±0.4 ±0.4 ±0.4 ±0.4 ±0.6 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 22 20 16 13 14 14 14 14 14
CPR at Boresight, dB 17 17 19 17 24 23 22 23 18 19
CPR at Sector, dB 10 11 9 11 11 10 11 7 6 4

Mechanical Specifications

Wind Loading @ Velocity, frontal 239.0 N @ 150 km/h (53.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 201.0 N @ 150 km/h (45.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 507.0 N @ 150 km/h (114.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 254.0 N @ 150 km/h (57.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 1643 mm | 64.685 in
Weight, gross 38.2 kg | 84.216 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 10
RF Connector Quantity, low band 4
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 1499 mm | 59.016 in
Net Weight, antenna only 28.8 kg | 63.493 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 880 – 960 MHz | 1427 – 1518 MHz | 1695 – 2180 MHz | 2490 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–862 880–960 1427–1518 1695–1995 1695–1995 1920–2180 1920–2180 2490–2690 2490–2690
Gain by all Beam Tilts, average, dBi 13.8 14.0 14.2 15.6 16.7 16.2 16.8 16.4 16.5 15.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.4 ±0.2 ±0.5 ±0.5 ±0.3 ±0.4 ±0.6 ±0.6
Beamwidth, Horizontal Tolerance, degrees ±2 ±2 ±2 ±3 ±3 ±3 ±2 ±2 ±7 ±5
Beamwidth, Vertical Tolerance, degrees ±1.6 ±0.8 ±0.9 ±0.4 ±0.4 ±0.4 ±0.4 ±0.6 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 22 20 16 13 14 14 14 14 14
CPR at Boresight, dB 17 17 19 17 24 23 22 23 18 19
CPR at Sector, dB 10 11 9 11 11 10 11 7 6 4

Mechanical Specifications

Wind Loading @ Velocity, frontal 239.0 N @ 150 km/h (53.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 201.0 N @ 150 km/h (45.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 507.0 N @ 150 km/h (114.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 254.0 N @ 150 km/h (57.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 1643 mm | 64.685 in
Weight, gross 38.2 kg | 84.216 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification