Warning Icon
This product will be discontinued on: March 31, 2021

For other alternatives, please contact us for more information.

0 Replacement products available

3X-C70B-3XR

6-port tri-sector antenna, 3x 790–960 MHz, 70° HPBW, 3x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Three DualPol® antennas under one radome
  • Fully integrated flange mounting system for ease of installation
  • Each antenna allows for independent beam tilting to optimize each sector
  • Aesthetically pleasing concealment solution for tough zoning areas
Specifications

General Specifications

Antenna Type Sector
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 6
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Length 2200 mm | 86.614 in
Outer Diameter 270 mm | 10.63 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz
Polarization ±45°

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET Low band (3)

Electrical Specifications

Frequency Band, MHz 790–896 870–960
Gain, dBi 15.0 15.5
Beamwidth, Horizontal, degrees 72 71
Beamwidth, Vertical, degrees 10.9 10.2
Beam Tilt, degrees 0–14 0–14
USLS (First Lobe), dB 17 17
Front-to-Back Ratio at 180°, dB 21 22
Isolation by Beam Tilt, dB 28, 0° – 2°
30, 3° – 14°
28, 0° – 2°
30, 3° – 14°
Isolation, Inter-band, dB 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 350 350

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 14.6 15.2
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 14.6
7 ° | 14.7
14 ° | 14.4
0 ° | 15.1
7 ° | 15.3
14 ° | 14.8
Beamwidth, Horizontal Tolerance, degrees ±2.4 ±1.1
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.6
USLS, beampeak to 20° above beampeak, dB 16 15
Front-to-Back Total Power at 180° ± 30°, dB 17 18
CPR at Boresight, dB 16 15
CPR at Sector, dB 10 9

Mechanical Specifications

Wind Loading at Velocity, maximum 117.4 lbf @ 150 km/h | 522.0 N @ 150 km/h
Wind Speed, maximum 200 km/h | 124.274 mph

Packaging and Weights

Width, packed 466 mm | 18.346 in
Depth, packed 436 mm | 17.165 in
Length, packed 2403 mm | 94.606 in
Net Weight, without mounting kit 37.1 kg | 81.791 lb
Weight, gross 47.3 kg | 104.279 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

General Specifications

Antenna Type Sector
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Aluminum
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 6
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Length 2200 mm | 86.614 in
Outer Diameter 270 mm | 10.63 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz
Polarization ±45°

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET Low band (3)

Electrical Specifications

Frequency Band, MHz 790–896 870–960
Gain, dBi 15.0 15.5
Beamwidth, Horizontal, degrees 72 71
Beamwidth, Vertical, degrees 10.9 10.2
Beam Tilt, degrees 0–14 0–14
USLS (First Lobe), dB 17 17
Front-to-Back Ratio at 180°, dB 21 22
Isolation by Beam Tilt, dB 28, 0° – 2°; 30, 3° – 14° 28, 0° – 2°; 30, 3° – 14°
Isolation, Inter-band, dB 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 350 350

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 14.6 15.2
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 14.6; 7 ° | 14.7; 14 ° | 14.4 0 ° | 15.1; 7 ° | 15.3; 14 ° | 14.8
Beamwidth, Horizontal Tolerance, degrees ±2.4 ±1.1
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.6
USLS, beampeak to 20° above beampeak, dB 16 15
Front-to-Back Total Power at 180° ± 30°, dB 17 18
CPR at Boresight, dB 16 15
CPR at Sector, dB 10 9

Mechanical Specifications

Wind Loading at Velocity, maximum 117.4 lbf @ 150 km/h | 522.0 N @ 150 km/h
Wind Speed, maximum 200 km/h | 124.274 mph

Packaging and Weights

Width, packed 466 mm | 18.346 in
Depth, packed 436 mm | 17.165 in
Length, packed 2403 mm | 94.606 in
Net Weight, without mounting kit 37.1 kg | 81.791 lb
Weight, gross 47.3 kg | 104.279 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
Other Ways to Browse