Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

2VV-33C-R4

8-port multibeam antenna, 8x 1695–2690 MHz, 4x 33° HPBW, 4x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Enhances network capacity and spectrum utilization when used in six sector applications
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs – 3 antennas required for 6 sector configurations
Specifications

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 395 mm | 15.551 in
Length 2499 mm | 98.386 in
Depth 228 mm | 8.976 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Total Input Power, maximum 1,200 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET High band (4)

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain, dBi 18.4 19.0 19.4 19.8 20.2
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 39 37 36 34 29
Beamwidth, Vertical, degrees 7.9 7.4 6.9 6.2 5.6
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 20 19
Front-to-Back Ratio at 180°, dB 32 33 33 33 31
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Beam to Beam, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 17.8 18.6 18.8 19.4 19.7
Gain by all Beam Tilts Tolerance, dB ±0.9 ±0.6 ±0.5 ±0.6 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 17.7
7 ° | 17.9
12 ° | 17.7
2 ° | 18.3
7 ° | 18.7
12 ° | 18.5
2 ° | 18.6
7 ° | 19.0
12 ° | 18.7
2 ° | 19.1
7 ° | 19.5
12 ° | 19.3
2 ° | 19.4
7 ° | 19.9
12 ° | 19.4
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±2.1 ±2.2 ±3.9 ±1.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.3 ±0.5 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 16 16 17 16
Front-to-Back Total Power at 180° ± 30°, dB 23 25 25 27 25
CPR at Boresight, dB 21 23 24 20 27
CPR at 10 dB Horizontal Beamwidth, dB 11 16 16 14 10

Material Specifications

Radiator Material Low loss circuit board

Mechanical Specifications

Wind Loading at Velocity, frontal 118.7 lbf @ 150 km/h | 525.0 N @ 150 km/h
Wind Loading at Velocity, lateral 386.0 N @ 150 km/h | 86.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum 201.9 lbf @ 150 km/h | 898.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Net Weight, without mounting kit 36 kg | 79.366 lb
Weight, gross 51.8 kg | 114.199 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 395 mm | 15.551 in
Length 2499 mm | 98.386 in
Depth 228 mm | 8.976 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Total Input Power, maximum 1,200 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET High band (4)

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain, dBi 18.4 19.0 19.4 19.8 20.2
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 39 37 36 34 29
Beamwidth, Vertical, degrees 7.9 7.4 6.9 6.2 5.6
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 16 16 20 19
Front-to-Back Ratio at 180°, dB 32 33 33 33 31
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Beam to Beam, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 17.8 18.6 18.8 19.4 19.7
Gain by all Beam Tilts Tolerance, dB ±0.9 ±0.6 ±0.5 ±0.6 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 17.7; 7 ° | 17.9;12 ° | 17.7 2 ° | 18.3; 7 ° | 18.7;12 ° | 18.5 2 ° | 18.6; 7 ° | 19.0;12 ° | 18.7 2 ° | 19.1; 7 ° | 19.5;12 ° | 19.3 2 ° | 19.4; 7 ° | 19.9;12 ° | 19.4
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±2.1 ±2.2 ±3.9 ±1.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.3 ±0.5 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 16 16 17 16
Front-to-Back Total Power at 180° ± 30°, dB 23 25 25 27 25
CPR at Boresight, dB 21 23 24 20 27
CPR at 10 dB Horizontal Beamwidth, dB 11 16 16 14 10

Material Specifications

Radiator Material Low loss circuit board

Mechanical Specifications

Wind Loading at Velocity, frontal 118.7 lbf @ 150 km/h | 525.0 N @ 150 km/h
Wind Loading at Velocity, lateral 386.0 N @ 150 km/h | 86.8 lbf @ 150 km/h
Wind Loading at Velocity, maximum 201.9 lbf @ 150 km/h | 898.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2631 mm | 103.583 in
Net Weight, without mounting kit 36 kg | 79.366 lb
Weight, gross 51.8 kg | 114.199 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
Documentation & Downloads

Assembly Drawing

Environment Health and Safety

Product Information

Product Specification

Product Specification (Comprehensive)

Warranty

Other Ways to Browse