Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

2HH-38A-R4-V2

8-port multibeam antenna, 8x 1695–2200 MHz, 4x 38° HPBW, 4x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Enhances network capacity through six sectors site application with only three antenna faces
  • Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs
  • High gain with excellent sector edge roll-off and azimuth sidelobe suppression
  • Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Specifications

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Width 640 mm | 25.197 in
Length 1224 mm | 48.189 in
Depth 235 mm | 9.252 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2200 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Input Voltage 10–30 Vdc
Internal RET High band (4)

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain, dBi 19.3 19.7 20.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.7 7.3 6.8
Beam Tilt, degrees 2–10 2–10 2–10
Horizontal Sidelobe, dB 24 24 23
USLS (First Lobe), dB 24 24 24
Front-to-Back Ratio at 180°, dB 36 36 34
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 17 17 17
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 18.8
6 ° | 19.0
10 ° | 18.9
2 ° | 19.3
6 ° | 19.5
10 ° | 19.4
2 ° | 19.8
6 ° | 19.7
10 ° | 19.2
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.7 ±3.2
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 19 19
Front-to-Back Total Power at 180° ± 30°, dB 28 29 28
CPR at Boresight, dB 21 22 21
CPR at Sector, dB 11 13 12

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 114.4 lbf @ 150 km/h | 505.0 N @ 150 km/h
Wind Loading at Velocity, lateral 35.1 lbf @ 150 km/h | 156.0 N @ 150 km/h
Wind Loading at Velocity, maximum 688.0 N @ 150 km/h | 154.7 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 797 mm | 31.378 in
Depth, packed 402 mm | 15.827 in
Length, packed 1375 mm | 54.134 in
Net Weight, without mounting kit 29.7 kg | 65.477 lb
Weight, gross 45.6 kg | 100.531 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male

Dimensions

Width 640 mm | 25.197 in
Length 1224 mm | 48.189 in
Depth 235 mm | 9.252 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2200 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Input Voltage 10–30 Vdc
Internal RET High band (4)

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain, dBi 19.3 19.7 20.0
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 7.7 7.3 6.8
Beam Tilt, degrees 2–10 2–10 2–10
Horizontal Sidelobe, dB 24 24 23
USLS (First Lobe), dB 24 24 24
Front-to-Back Ratio at 180°, dB 36 36 34
Isolation, Cross Polarization, dB 30 30 30
Isolation, Inter-band, dB 17 17 17
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200
Gain by all Beam Tilts, average, dBi 18.9 19.4 19.6
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 18.8; 6 ° | 19.0;10 ° | 18.9 2 ° | 19.3; 6 ° | 19.5;10 ° | 19.4 2 ° | 19.8; 6 ° | 19.7;10 ° | 19.2
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.7 ±3.2
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.6
USLS, beampeak to 20° above beampeak, dB 18 19 19
Front-to-Back Total Power at 180° ± 30°, dB 28 29 28
CPR at Boresight, dB 21 22 21
CPR at Sector, dB 11 13 12

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 114.4 lbf @ 150 km/h | 505.0 N @ 150 km/h
Wind Loading at Velocity, lateral 35.1 lbf @ 150 km/h | 156.0 N @ 150 km/h
Wind Loading at Velocity, maximum 688.0 N @ 150 km/h | 154.7 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 797 mm | 31.378 in
Depth, packed 402 mm | 15.827 in
Length, packed 1375 mm | 54.134 in
Net Weight, without mounting kit 29.7 kg | 65.477 lb
Weight, gross 45.6 kg | 100.531 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
Other Ways to Browse