Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

2H-33A-R2

4-port multibeam antenna, 4x 1695–2400 MHz, 2x 38° HPBW, 2x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Enhances network capacity through six sectors site application with only three antenna faces
  • Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs
  • High gain with excellent sector edge roll-off and azimuth sidelobe suppression
  • Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Specifications

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400
Gain, dBi 19.1 19.6 19.9 19.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34 30
Beamwidth, Vertical, degrees 7.5 7 6.5 5.9
Beam Tilt, degrees 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 19 18
Front-to-Back Ratio at 180°, dB 34 37 37 30
Isolation, Cross Polarization, dB 28 28 28 28
Isolation, Inter-band, dB 16 16 16 16
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400
Gain by all Beam Tilts, average, dBi 18.7 19.3 19.6 18.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.6 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 18.6
7 ° | 18.8
12 ° | 18.6
2 ° | 19.1
7 ° | 19.4
12 ° | 19.2
2 ° | 19.5
7 ° | 19.8
12 ° | 19.0
2 ° | 19.0
7 ° | 18.8
12 ° | 18.3
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.3 ±2.2 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 15 15 15
Front-to-Back Total Power at 180° ± 30°, dB 28 29 27 24
CPR at Boresight, dB 23 24 19 13

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male | 8-pin DIN Female
RET Interface, quantity 2 male | 2 female

Dimensions

Width 350 mm | 13.78 in
Length 1400 mm | 55.118 in
Depth 208 mm | 8.189 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2400 MHz

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET High band (2)

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 221.0 N @ 150 km/h | 49.7 lbf @ 150 km/h
Wind Loading at Velocity, lateral 41.6 lbf @ 150 km/h | 185.0 N @ 150 km/h
Wind Loading at Velocity, maximum 469.0 N @ 150 km/h | 105.4 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 447 mm | 17.598 in
Depth, packed 354 mm | 13.937 in
Length, packed 1544 mm | 60.787 in
Net Weight, without mounting kit 17.6 kg | 38.801 lb
Weight, gross 30 kg | 66.139 lb

Array Layout

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant/Exempted
CHINA-ROHS CHINA-ROHSAbove maximum concentration value

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400
Gain, dBi 19.1 19.6 19.9 19.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34 30
Beamwidth, Vertical, degrees 7.5 7 6.5 5.9
Beam Tilt, degrees 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 19 18
Front-to-Back Ratio at 180°, dB 34 37 37 30
Isolation, Cross Polarization, dB 28 28 28 28
Isolation, Inter-band, dB 16 16 16 16
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port, maximum, watts 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2180 2300–2400
Gain by all Beam Tilts, average, dBi 18.7 19.3 19.6 18.7
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.6 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 18.6; 7 ° | 18.8;12 ° | 18.6 2 ° | 19.1; 7 ° | 19.4;12 ° | 19.2 2 ° | 19.5; 7 ° | 19.8;12 ° | 19.0 2 ° | 19.0; 7 ° | 18.8;12 ° | 18.3
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.3 ±2.2 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 15 15 15
Front-to-Back Total Power at 180° ± 30°, dB 28 29 27 24
CPR at Boresight, dB 23 24 19 13

General Specifications

Antenna Type Multibeam
Polarization ±45°
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information, General

RET Interface 8-pin DIN Male | 8-pin DIN Female
RET Interface, quantity 2 male | 2 female

Dimensions

Width 350 mm | 13.78 in
Length 1400 mm | 55.118 in
Depth 208 mm | 8.189 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2400 MHz

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET High band (2)

Material Specifications

Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 221.0 N @ 150 km/h | 49.7 lbf @ 150 km/h
Wind Loading at Velocity, lateral 41.6 lbf @ 150 km/h | 185.0 N @ 150 km/h
Wind Loading at Velocity, maximum 469.0 N @ 150 km/h | 105.4 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 447 mm | 17.598 in
Depth, packed 354 mm | 13.937 in
Length, packed 1544 mm | 60.787 in
Net Weight, without mounting kit 17.6 kg | 38.801 lb
Weight, gross 30 kg | 66.139 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE CECompliant with the relevant CE product directives
ISO 9001:2015 ISO 9001:2015Designed, manufactured and/or distributed under this quality management system
ROHS ROHSCompliant/Exempted
CHINA-ROHS CHINA-ROHSAbove maximum concentration value