Warning Icon
This product was discontinued on: March 31, 2023

For other alternatives, please contact us for more information.

0 Replacement products available

10P-2L8M-B5-V2

10-port sector antenna, 2x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 5x RET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Utilizes RET-PMOD-A20-5A07

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 2090 mm | 82.284 in
Net Weight, without mounting kit 21.9 kg | 48.281 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain, dBi 15.5 15.8 16.1 16.6 16.9 16.9 17.1
Beamwidth, Horizontal, degrees 73 70 68 63 62 60 63
Beamwidth, Vertical, degrees 10.7 9.6 8.9 8.7 7.9 6.9 6.5
Beam Tilt, degrees 0–12 0–12 0–12 0–12 0–12 0–12 0–12
USLS (First Lobe), dB 17 17 20 17 18 20 20
Front-to-Back Ratio at 180°, dB 32 32 30 34 34 32 36
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 27 27 27 29 29 30 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Band, total, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.6 15.8 15.9 16.5 16.5 16.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.4 ±0.9 ±0.6 ±0.6 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±1.6 ±1.2 ±5.3 ±4.6 ±5.8 ±5.3
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7 ±0.5 ±0.5 ±0.6 ±0.4 ±0.3
Front-to-Back Total Power at 180° ± 30°, dB 22 23 24 27 27 27 28
CPR at Boresight, dB 22 25 25 16 18 19 18
CPR at Sector, dB 13 10 9 11 10 7 8

Mechanical Specifications

Mechanical Tilt Range 0°–16°
Wind Loading @ Velocity, frontal 327.0 N @ 150 km/h (73.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 272.0 N @ 150 km/h (61.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 631.0 N @ 150 km/h (142.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 376.0 N @ 150 km/h (84.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 2234 mm | 87.953 in
Weight, gross 34.7 kg | 76.500 lb

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 2090 mm | 82.284 in
Net Weight, without mounting kit 21.9 kg | 48.281 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W

Electrical Specifications

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain, dBi 15.5 15.8 16.1 16.6 16.9 16.9 17.1
Beamwidth, Horizontal, degrees 73 70 68 63 62 60 63
Beamwidth, Vertical, degrees 10.7 9.6 8.9 8.7 7.9 6.9 6.5
Beam Tilt, degrees 0–12 0–12 0–12 0–12 0–12 0–12 0–12
USLS (First Lobe), dB 17 17 20 17 18 20 20
Front-to-Back Ratio at 180°, dB 32 32 30 34 34 32 36
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 27 27 27 29 29 30 30
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Band, total, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.6 15.8 15.9 16.5 16.5 16.7
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.4 ±0.9 ±0.6 ±0.6 ±0.5
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±1.6 ±1.2 ±5.3 ±4.6 ±5.8 ±5.3
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.7 ±0.5 ±0.5 ±0.6 ±0.4 ±0.3
Front-to-Back Total Power at 180° ± 30°, dB 22 23 24 27 27 27 28
CPR at Boresight, dB 22 25 25 16 18 19 18
CPR at Sector, dB 13 10 9 11 10 7 8

Mechanical Specifications

Mechanical Tilt Range 0°–16°
Wind Loading @ Velocity, frontal 327.0 N @ 150 km/h (73.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 272.0 N @ 150 km/h (61.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 631.0 N @ 150 km/h (142.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 376.0 N @ 150 km/h (84.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 2234 mm | 87.953 in
Weight, gross 34.7 kg | 76.500 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Product Specification

Product Specification