Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2NN2HH-33B-R4

16-port multibeam antenna, 8x 698–896 MHz, 2x 2-beam 33° HPBW and 8x 1695–2400 MHz, 2x 2-beam 33° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Provides 4T4R capability in low and mid bands
  • Full spectrum operation for Band 14, AWS, PCS and WCS bands
  • Twin beam patterns are optimized for minimum beam crossover providing for improved LTE data throughput
  • Excellent Front-to-Back and SPR performance

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface AISG1 8-pin DIN Female | AISG1 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1828 mm | 71.969 in
Net Weight, without mounting kit 57 kg | 125.663 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 824–896 1695–1880 1850–1990 1920–2200 2300–2400
Gain, dBi 13.7 14.8 17.7 18.3 19.1 19.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 42 35 35 33 32 28
Beamwidth, Vertical, degrees 23.7 21.5 7.7 7.3 6.9 6.3
Beam Tilt, degrees 2–20 2–20 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 17 16 17 18 22
Front-to-Back Ratio at 180°, dB 26 29 36 37 36 34
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 824–896 1695–1880 1850–1990 1920–2200 2300–2400
Gain by all Beam Tilts, average, dBi 13.1 14.2 17.0 17.9 18.3 18.5
Gain by all Beam Tilts Tolerance, dB ±0.9 ±1 ±1 ±0.4 ±0.8 ±1
Beamwidth, Horizontal Tolerance, degrees ±2.7 ±3 ±2.1 ±1.2 ±1.9 ±1.2
Beamwidth, Vertical Tolerance, degrees ±1.5 ±1.1 ±0.3 ±0.2 ±0.4 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 16 17 16
Front-to-Back Total Power at 180° ± 30°, dB 21 21 27 29 29 27
CPR at Boresight, dB 17 17 17 19 21 21
CPR at 10 dB Horizontal Beamwidth, dB 6 5 9 13 14 13

Mechanical Specifications

Wind Loading @ Velocity, frontal 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,039.0 N @ 150 km/h (233.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 787.0 N @ 150 km/h (176.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1982 mm | 78.032 in
Weight, gross 74 kg | 163.142 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 8
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface AISG1 8-pin DIN Female | AISG1 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1828 mm | 71.969 in
Net Weight, without mounting kit 57 kg | 125.663 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 698–806 824–896 1695–1880 1850–1990 1920–2200 2300–2400
Gain, dBi 13.7 14.8 17.7 18.3 19.1 19.1
Beam Centers, Horizontal, degrees ±27 ±27 ±27 ±27 ±27 ±27
Beamwidth, Horizontal, degrees 42 35 35 33 32 28
Beamwidth, Vertical, degrees 23.7 21.5 7.7 7.3 6.9 6.3
Beam Tilt, degrees 2–20 2–20 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 17 16 17 18 22
Front-to-Back Ratio at 180°, dB 26 29 36 37 36 34
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 200 200 200 200 200 150

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 824–896 1695–1880 1850–1990 1920–2200 2300–2400
Gain by all Beam Tilts, average, dBi 13.1 14.2 17.0 17.9 18.3 18.5
Gain by all Beam Tilts Tolerance, dB ±0.9 ±1 ±1 ±0.4 ±0.8 ±1
Beamwidth, Horizontal Tolerance, degrees ±2.7 ±3 ±2.1 ±1.2 ±1.9 ±1.2
Beamwidth, Vertical Tolerance, degrees ±1.5 ±1.1 ±0.3 ±0.2 ±0.4 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 16 17 16
Front-to-Back Total Power at 180° ± 30°, dB 21 21 27 29 29 27
CPR at Boresight, dB 17 17 17 19 21 21
CPR at 10 dB Horizontal Beamwidth, dB 6 5 9 13 14 13

Mechanical Specifications

Wind Loading @ Velocity, frontal 764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,039.0 N @ 150 km/h (233.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 787.0 N @ 150 km/h (176.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1982 mm | 78.032 in
Weight, gross 74 kg | 163.142 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

Product Specification

Product Specification