Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FFV4-65B-R3-V1

12-port sector antenna, 4x 617-894 and 8x 1695–2690 MHz, 65° HPBW, 3x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1828 mm | 71.969 in
Net Weight, without mounting kit 49 kg | 108.026 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 14.4 14.7 17.6 18.0 18.4 18.4 19.0
Beamwidth, Horizontal, degrees 61 59 63 61 61 59 59
Beamwidth, Vertical, degrees 14.6 12.4 5.6 5.3 5.1 4.5 4.1
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 20 19 20 20 19
Front-to-Back Ratio at 180°, dB 29 33 35 33 30 31 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 14.0 14.3 17.2 17.6 17.9 18.1 18.4
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.5 ±0.5 ±0.4 ±0.6 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 14.1
8 ° | 14.0
14 ° | 13.8
2 ° | 14.5
8 ° | 14.4
14 ° | 14.0
2 ° | 17.2
7 ° | 17.3
12 ° | 17.1
2 ° | 17.5
7 ° | 17.7
12 ° | 17.5
2 ° | 17.6
7 ° | 18.0
12 ° | 18.0
2 ° | 17.9
7 ° | 18.3
12 ° | 17.8
2 ° | 18.2
7 ° | 18.7
12 ° | 18.2
Beamwidth, Horizontal Tolerance, degrees ±4.2 ±4.8 ±3.6 ±4.4 ±5.5 ±6.2 ±8.3
Beamwidth, Vertical Tolerance, degrees ±1.2 ±1.4 ±0.3 ±0.3 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 21 19 14 15 17 16 15
Front-to-Back Total Power at 180° ± 30°, dB 21 22 27 27 24 25 25
CPR at Boresight, dB 16 16 19 21 19 17 21
CPR at Sector, dB 8 8 6 6 5 5 7

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.72 m² | 7.75 ft²
Effective Projective Area (EPA), lateral 0.24 m² | 2.583 ft²
Mechanical Tilt Range 0°–15°
Wind Loading @ Velocity, frontal 765.0 N @ 150 km/h (172.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,041.0 N @ 150 km/h (234.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1982 mm | 78.032 in
Weight, gross 67 kg | 147.710 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 1828 mm | 71.969 in
Net Weight, without mounting kit 49 kg | 108.026 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 14.4 14.7 17.6 18.0 18.4 18.4 19.0
Beamwidth, Horizontal, degrees 61 59 63 61 61 59 59
Beamwidth, Vertical, degrees 14.6 12.4 5.6 5.3 5.1 4.5 4.1
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 20 20 20 19 20 20 19
Front-to-Back Ratio at 180°, dB 29 33 35 33 30 31 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 14.0 14.3 17.2 17.6 17.9 18.1 18.4
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.5 ±0.5 ±0.4 ±0.6 ±0.5 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 14.1; 8 ° | 14.0;14 ° | 13.8 2 ° | 14.5; 8 ° | 14.4;14 ° | 14.0 2 ° | 17.2; 7 ° | 17.3;12 ° | 17.1 2 ° | 17.5; 7 ° | 17.7;12 ° | 17.5 2 ° | 17.6; 7 ° | 18.0;12 ° | 18.0 2 ° | 17.9; 7 ° | 18.3;12 ° | 17.8 2 ° | 18.2; 7 ° | 18.7;12 ° | 18.2
Beamwidth, Horizontal Tolerance, degrees ±4.2 ±4.8 ±3.6 ±4.4 ±5.5 ±6.2 ±8.3
Beamwidth, Vertical Tolerance, degrees ±1.2 ±1.4 ±0.3 ±0.3 ±0.4 ±0.2 ±0.2
USLS, beampeak to 20° above beampeak, dB 21 19 14 15 17 16 15
Front-to-Back Total Power at 180° ± 30°, dB 21 22 27 27 24 25 25
CPR at Boresight, dB 16 16 19 21 19 17 21
CPR at Sector, dB 8 8 6 6 5 5 7

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.72 m² | 7.75 ft²
Effective Projective Area (EPA), lateral 0.24 m² | 2.583 ft²
Mechanical Tilt Range 0°–15°
Wind Loading @ Velocity, frontal 765.0 N @ 150 km/h (172.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,041.0 N @ 150 km/h (234.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 788.0 N @ 150 km/h (177.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 387 mm | 15.236 in
Length, packed 1982 mm | 78.032 in
Weight, gross 67 kg | 147.710 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

Product Specification

Product Specification