FFV4-65C-R3-V1
12-port sector antenna, 4x 617-894 and 8x 1695–2690 MHz, 65° HPBW, 3x RET
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 10 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 640 mm | 25.197 in |
| Depth | 235 mm | 9.252 in |
| Length | 2437 mm | 95.945 in |
| Net Weight, antenna only | 59.8 kg | 131.836 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 15.7 | 16.3 | 17.7 | 18.1 | 18.6 | 18.7 | 19.2 |
| Beamwidth, Horizontal, degrees | 64 | 62 | 62 | 61 | 61 | 60 | 60 |
| Beamwidth, Vertical, degrees | 10.4 | 8.6 | 5.6 | 5.3 | 5 | 4.3 | 4 |
| Beam Tilt, degrees | 2–13 | 2–13 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 17 | 19 | 18 | 20 | 19 | 19 |
| Front-to-Back Ratio at 180°, dB | 29 | 32 | 33 | 31 | 30 | 30 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 15.5 | 15.8 | 17.3 | 17.7 | 18.0 | 18.3 | 18.6 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.5 | ±0.5 | ±0.5 | ±0.6 | ±0.6 | ±0.7 |
| Gain by Beam Tilt, average, dBi | 2 ° | 15.3 7 ° | 15.613 ° | 15.5 | 2 ° | 15.7 7 ° | 16.013 ° | 15.6 | 2 ° | 17.2 7 ° | 17.412 ° | 17.2 | 2 ° | 17.6 7 ° | 17.812 ° | 17.6 | 2 ° | 17.7 7 ° | 18.112 ° | 18.1 | 2 ° | 18.2 7 ° | 18.612 ° | 18.1 | 2 ° | 18.4 7 ° | 18.812 ° | 18.3 |
| Beamwidth, Horizontal Tolerance, degrees | ±3 | ±5 | ±4.4 | ±4.8 | ±5.7 | ±6.9 | ±10.1 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±1.1 | ±0.3 | ±0.3 | ±0.4 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 13 | 13 | 14 | 16 | 15 | 14 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 22 | 27 | 26 | 24 | 25 | 24 |
| CPR at Boresight, dB | 17 | 16 | 20 | 20 | 18 | 16 | 16 |
| CPR at Sector, dB | 9 | 8 | 6 | 5 | 4 | 5 | 7 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 1,055.0 N @ 150 km/h (237.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 1,433.0 N @ 150 km/h (322.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 752 mm | 29.606 in |
| Depth, packed | 382 mm | 15.039 in |
| Length, packed | 2590 mm | 101.969 in |
| Weight, gross | 86.5 kg | 190.700 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant, Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 8 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 12 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 2 W |
| Power Consumption, normal conditions, maximum | 10 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 640 mm | 25.197 in |
| Depth | 235 mm | 9.252 in |
| Length | 2437 mm | 95.945 in |
| Net Weight, antenna only | 59.8 kg | 131.836 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 15.7 | 16.3 | 17.7 | 18.1 | 18.6 | 18.7 | 19.2 |
| Beamwidth, Horizontal, degrees | 64 | 62 | 62 | 61 | 61 | 60 | 60 |
| Beamwidth, Vertical, degrees | 10.4 | 8.6 | 5.6 | 5.3 | 5 | 4.3 | 4 |
| Beam Tilt, degrees | 2–13 | 2–13 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 18 | 17 | 19 | 18 | 20 | 19 | 19 |
| Front-to-Back Ratio at 180°, dB | 29 | 32 | 33 | 31 | 30 | 30 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -153 | -153 | -153 | -153 | -153 | -153 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 15.5 | 15.8 | 17.3 | 17.7 | 18.0 | 18.3 | 18.6 |
| Gain by all Beam Tilts Tolerance, dB | ±0.4 | ±0.5 | ±0.5 | ±0.5 | ±0.6 | ±0.6 | ±0.7 |
| Gain by Beam Tilt, average, dBi | 2 ° | 15.3; 7 ° | 15.6;13 ° | 15.5 | 2 ° | 15.7; 7 ° | 16.0;13 ° | 15.6 | 2 ° | 17.2; 7 ° | 17.4;12 ° | 17.2 | 2 ° | 17.6; 7 ° | 17.8;12 ° | 17.6 | 2 ° | 17.7; 7 ° | 18.1;12 ° | 18.1 | 2 ° | 18.2; 7 ° | 18.6;12 ° | 18.1 | 2 ° | 18.4; 7 ° | 18.8;12 ° | 18.3 |
| Beamwidth, Horizontal Tolerance, degrees | ±3 | ±5 | ±4.4 | ±4.8 | ±5.7 | ±6.9 | ±10.1 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±1.1 | ±0.3 | ±0.3 | ±0.4 | ±0.3 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 18 | 13 | 13 | 14 | 16 | 15 | 14 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 22 | 27 | 26 | 24 | 25 | 24 |
| CPR at Boresight, dB | 17 | 16 | 20 | 20 | 18 | 16 | 16 |
| CPR at Sector, dB | 9 | 8 | 6 | 5 | 4 | 5 | 7 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 1,055.0 N @ 150 km/h (237.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 1,433.0 N @ 150 km/h (322.2 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 752 mm | 29.606 in |
| Depth, packed | 382 mm | 15.039 in |
| Length, packed | 2590 mm | 101.969 in |
| Weight, gross | 86.5 kg | 190.700 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant, Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Included Products
Antennas
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. -
![]()
BSAMNT-M4 Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor bracket set.
Other Ways to Browse
