Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

R2HH-6533D-R5

10-port sector/multibeam antenna, 2x 694–960 MHz 65° HPBW and 8x 1695–2180 MHz 4x 33°HPBW, 5x RET with tilt indicators

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
  • Enhances network capacity through six sectors on high band while maintaining low band coverage layer through three sectors with only three antenna faces

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 35 kg | 77.162 lb

Array Layout

Click on image to enlarge.

Beams Configuration

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2180 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180
Gain, dBi 16.4 16.9 16.9 18.4 19.3 19.8
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 68 65 65 33 31 31
Beamwidth, Vertical, degrees 8.9 8 7.4 7.2 6.8 6.4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 19 16 16 17
Front-to-Back Ratio at 180°, dB 32 34 34 28 34 36
Isolation, Cross Polarization, dB 28 28 28 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
Isolation, Beam to Beam, dB 17 17 17
VSWR | Return loss, dB 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 16.3 16.7 16.8 17.7 18.8 19.3
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.3 ±0.3 ±1.1 ±0.6 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 16.1
7 ° | 16.3
12 ° | 16.3
2 ° | 16.5
7 ° | 16.8
12 ° | 16.6
2 ° | 16.6
7 ° | 16.9
12 ° | 16.7
2 ° | 17.6
7 ° | 17.8
12 ° | 17.5
2 ° | 18.6
7 ° | 18.9
12 ° | 18.6
2 ° | 19.1
7 ° | 19.5
12 ° | 18.9
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.4 ±1.9 ±1.8 ±1.7 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.4 ±0.3 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 17 18 17 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 25 24 24 24 27 28
CPR at Boresight, dB 16 17 17 16 17 18
CPR at Sector, dB 10 10 9
CPR at 10 dB Horizontal Beamwidth, dB 6 8 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Weight, gross 50 kg | 110.231 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 35 kg | 77.162 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2180 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180
Gain, dBi 16.4 16.9 16.9 18.4 19.3 19.8
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 68 65 65 33 31 31
Beamwidth, Vertical, degrees 8.9 8 7.4 7.2 6.8 6.4
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 19 16 16 17
Front-to-Back Ratio at 180°, dB 32 34 34 28 34 36
Isolation, Cross Polarization, dB 28 28 28 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
Isolation, Beam to Beam, dB 17 17 17
VSWR | Return loss, dB 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5 1.46 | 14.5
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 880–960 1695–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 16.3 16.7 16.8 17.7 18.8 19.3
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.3 ±0.3 ±1.1 ±0.6 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 16.1; 7 ° | 16.3;12 ° | 16.3 2 ° | 16.5; 7 ° | 16.8;12 ° | 16.6 2 ° | 16.6; 7 ° | 16.9;12 ° | 16.7 2 ° | 17.6; 7 ° | 17.8;12 ° | 17.5 2 ° | 18.6; 7 ° | 18.9;12 ° | 18.6 2 ° | 19.1; 7 ° | 19.5;12 ° | 18.9
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1.4 ±1.9 ±1.8 ±1.7 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.4 ±0.4 ±0.3 ±0.3 ±0.4
USLS, beampeak to 20° above beampeak, dB 17 18 17 15 16 17
Front-to-Back Total Power at 180° ± 30°, dB 25 24 24 24 27 28
CPR at Boresight, dB 16 17 17 16 17 18
CPR at Sector, dB 10 10 9
CPR at 10 dB Horizontal Beamwidth, dB 6 8 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Weight, gross 50 kg | 110.231 lb
Click on image to enlarge.
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification