Warning Icon
This product was discontinued on: March 31, 2022

For other alternatives, please contact us for more information.

1 Replacement products available
  • RRV4-65D-R6
    12-port sector antenna, 4x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 6x RET. Antenna rear wind loading 880N @ 150km/h

EGV365D-FL-C3-5XR

10-port sector antenna, 2x 694–862, 2x 880–960 and 6x 1695–2690 MHz, 65° HPBW, 5x RET. Low band arrays are diplexed at the element level.

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 4
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 41.1 kg | 90.61 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 880 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

LB LB HB1/HB2 HB1/HB2 HB1/HB2 HB3 HB3 HB3
Frequency Band, MHz 694–862 880–960 1695–1920 1920–2180 2300–2690 1695–1920 1920–2180 2300–2690
Gain, dBi 16.5 16.9 17.1 17.5 18.2 18.1 18.7 19.2
Beamwidth, Horizontal, degrees 66 62 63 64 62 62 63 61
Beamwidth, Vertical, degrees 8.2 7.2 7.5 6.7 5.5 5.5 5 4.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 19 20 16 16 16 16
Front-to-Back Ratio at 180°, dB 33 36 32 35 34 32 37 37
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 250 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–862 880–960 1695–1920 1920–2180 2300–2690 1695–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 16.2 16.7 16.6 17.2 17.8 17.8 18.4 19.0
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.6 ±0.5 ±0.7 ±0.4 ±0.3
Gain by Beam Tilt, average, dBi 2 ° | 16.2
7 ° | 16.3
12 ° | 16.1
2 ° | 16.7
7 ° | 16.7
12 ° | 16.5
2 ° | 16.4
7 ° | 16.7
12 ° | 16.4
2 ° | 16.9
7 ° | 17.3
12 ° | 17.1
2 ° | 17.5
7 ° | 17.9
12 ° | 17.5
2 ° | 17.6
7 ° | 17.9
12 ° | 17.6
2 ° | 18.1
7 ° | 18.5
12 ° | 18.3
2 ° | 18.8
7 ° | 19.2
12 ° | 18.7
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±2.1 ±3.5 ±2.1 ±3.5 ±3.5 ±2.7 ±3.6
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.4 ±0.5 ±0.5 ±0.4 ±0.3 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 15 13 15 13 16 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 24 26 26 27 27 27 28
CPR at Boresight, dB 21 23 18 20 20 18 22 18
CPR at Sector, dB 11 10 11 11 7 10 9 7

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Weight, gross 57.6 kg | 126.986 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, low band 4
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 41.1 kg | 90.61 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 880 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

LB LB HB1/HB2 HB1/HB2 HB1/HB2 HB3 HB3 HB3
Frequency Band, MHz 694–862 880–960 1695–1920 1920–2180 2300–2690 1695–1920 1920–2180 2300–2690
Gain, dBi 16.5 16.9 17.1 17.5 18.2 18.1 18.7 19.2
Beamwidth, Horizontal, degrees 66 62 63 64 62 62 63 61
Beamwidth, Vertical, degrees 8.2 7.2 7.5 6.7 5.5 5.5 5 4.2
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 20 19 20 16 16 16 16
Front-to-Back Ratio at 180°, dB 33 36 32 35 34 32 37 37
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 200 200 250 250 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–862 880–960 1695–1920 1920–2180 2300–2690 1695–1920 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 16.2 16.7 16.6 17.2 17.8 17.8 18.4 19.0
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.7 ±0.6 ±0.5 ±0.7 ±0.4 ±0.3
Gain by Beam Tilt, average, dBi 2 ° | 16.2; 7 ° | 16.3;12 ° | 16.1 2 ° | 16.7; 7 ° | 16.7;12 ° | 16.5 2 ° | 16.4; 7 ° | 16.7;12 ° | 16.4 2 ° | 16.9; 7 ° | 17.3;12 ° | 17.1 2 ° | 17.5; 7 ° | 17.9;12 ° | 17.5 2 ° | 17.6; 7 ° | 17.9;12 ° | 17.6 2 ° | 18.1; 7 ° | 18.5;12 ° | 18.3 2 ° | 18.8; 7 ° | 19.2;12 ° | 18.7
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±2.1 ±3.5 ±2.1 ±3.5 ±3.5 ±2.7 ±3.6
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.4 ±0.5 ±0.5 ±0.4 ±0.3 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 15 13 15 13 16 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 24 26 26 27 27 27 28
CPR at Boresight, dB 21 23 18 20 20 18 22 18
CPR at Sector, dB 11 10 11 11 7 10 9 7

Mechanical Specifications

Wind Loading @ Velocity, frontal 477.0 N @ 150 km/h (107.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,010.0 N @ 150 km/h (227.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 460 mm | 18.11 in
Depth, packed 350 mm | 13.78 in
Length, packed 2830 mm | 111.417 in
Weight, gross 57.6 kg | 126.986 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted