Warning Icon
This product was discontinued on: November 30, 2023

For other alternatives, please contact us for more information.

1 Replacement products available
  • RRZHHTT-65A-R6N39
    14-port sector antenna, 4x 694–960, 2x 1427–2690, 4x 1695-2180 and 4x 2490-2690 MHz, 65° HPBW, 6x RET

JCVHHTT-65B-R6

14-port sector antenna, 2x 698-803 (R1), 2x 824-960 (R2), 2x 1695-2690 (Y2), 4x 1695-2180 (B1-B2), 4x 2490-2690 (Y1 & Y3) MHz, 65° HPBW, 6x RET. Y1 & Y3 share a common RET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • Retractable tilt indicator rods

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, low band 4
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 1980 mm | 77.953 in
Net Weight, without mounting kit 35.6 kg | 78.484 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 803 MHz | 824 – 960 MHz | 1695 – 2180 MHz | 1695 – 2690 MHz | 2490 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 B1-B2 B1-B2 Y1/Y3 Y2 Y2 Y2
Frequency Band, MHz 698–803 824–960 1695–1880 1920–2180 2490–2690 1695–1880 1920–2180 2300–2690
Gain, dBi 15.0 15.5 17.4 18.4 17.9 17.5 18.8 18.8
Beamwidth, Horizontal, degrees 66 64 70 66 63 71 61 62
Beamwidth, Vertical, degrees 11.7 10.2 5.4 4.9 4.2 5.6 5 4.2
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 19 16 16 20 19 18 17
Front-to-Back Ratio at 180°, dB 31 33 32 34 30 32 36 33
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 150 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–803 824–960 1695–1880 1920–2180 2490–2690 1695–1880 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 14.8 15.2 17.1 18.0 17.5 17.2 18.4 18.3
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.4 ±0.6 ±0.5 ±0.7 ±0.7 ±0.7 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 14.8
9 ° | 14.9
14 ° | 14.6
2 ° | 15.1
9 ° | 15.3
14 ° | 14.9
2 ° | 17.1
7 ° | 17.2
12 ° | 17.1
2 ° | 17.9
7 ° | 18.1
12 ° | 17.8
2 ° | 17.5
7 ° | 17.6
12 ° | 17.2
2 ° | 17.1
7 ° | 17.2
12 ° | 17.2
2 ° | 18.3
7 ° | 18.5
12 ° | 18.4
2 ° | 18.3
7 ° | 18.5
12 ° | 17.9
Beamwidth, Horizontal Tolerance, degrees ±1.7 ±1.4 ±2.5 ±5.3 ±5.1 ±3.9 ±6.1 ±6.6
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.7 ±0.3 ±0.3 ±0.2 ±0.3 ±0.4 ±0.3
USLS, beampeak to 20° above beampeak, dB 17 17 16 16 16 16 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 23 23 25 24 28 28 27
CPR at Boresight, dB 18 16 17 19 15 21 21 16
CPR at Sector, dB 11 8 7 6 7 9 10 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 398.0 N @ 150 km/h (89.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 290.0 N @ 150 km/h (65.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 681.0 N @ 150 km/h (153.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2123 mm | 83.583 in
Weight, gross 52.1 kg | 114.861 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 10
RF Connector Quantity, low band 4
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 395 mm | 15.551 in
Depth 228 mm | 8.976 in
Length 1980 mm | 77.953 in
Net Weight, without mounting kit 35.6 kg | 78.484 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 803 MHz | 824 – 960 MHz | 1695 – 2180 MHz | 1695 – 2690 MHz | 2490 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 B1-B2 B1-B2 Y1/Y3 Y2 Y2 Y2
Frequency Band, MHz 698–803 824–960 1695–1880 1920–2180 2490–2690 1695–1880 1920–2180 2300–2690
Gain, dBi 15.0 15.5 17.4 18.4 17.9 17.5 18.8 18.8
Beamwidth, Horizontal, degrees 66 64 70 66 63 71 61 62
Beamwidth, Vertical, degrees 11.7 10.2 5.4 4.9 4.2 5.6 5 4.2
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 19 16 16 20 19 18 17
Front-to-Back Ratio at 180°, dB 31 33 32 34 30 32 36 33
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 150 250 250 200

Electrical Specifications, BASTA

Frequency Band, MHz 698–803 824–960 1695–1880 1920–2180 2490–2690 1695–1880 1920–2180 2300–2690
Gain by all Beam Tilts, average, dBi 14.8 15.2 17.1 18.0 17.5 17.2 18.4 18.3
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.4 ±0.6 ±0.5 ±0.7 ±0.7 ±0.7 ±0.7
Gain by Beam Tilt, average, dBi 2 ° | 14.8; 9 ° | 14.9;14 ° | 14.6 2 ° | 15.1; 9 ° | 15.3;14 ° | 14.9 2 ° | 17.1; 7 ° | 17.2;12 ° | 17.1 2 ° | 17.9; 7 ° | 18.1;12 ° | 17.8 2 ° | 17.5; 7 ° | 17.6;12 ° | 17.2 2 ° | 17.1; 7 ° | 17.2;12 ° | 17.2 2 ° | 18.3; 7 ° | 18.5;12 ° | 18.4 2 ° | 18.3; 7 ° | 18.5;12 ° | 17.9
Beamwidth, Horizontal Tolerance, degrees ±1.7 ±1.4 ±2.5 ±5.3 ±5.1 ±3.9 ±6.1 ±6.6
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.7 ±0.3 ±0.3 ±0.2 ±0.3 ±0.4 ±0.3
USLS, beampeak to 20° above beampeak, dB 17 17 16 16 16 16 16 16
Front-to-Back Total Power at 180° ± 30°, dB 26 23 23 25 24 28 28 27
CPR at Boresight, dB 18 16 17 19 15 21 21 16
CPR at Sector, dB 11 8 7 6 7 9 10 5

Mechanical Specifications

Wind Loading @ Velocity, frontal 398.0 N @ 150 km/h (89.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 290.0 N @ 150 km/h (65.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 681.0 N @ 150 km/h (153.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 409.0 N @ 150 km/h (91.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 505 mm | 19.882 in
Depth, packed 386 mm | 15.197 in
Length, packed 2123 mm | 83.583 in
Weight, gross 52.1 kg | 114.861 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system